{"title":"Routers, Bits \u0026 Accessories","description":"Find routers, router bits, tables, jigs, and guides for shaping and routing wood.","products":[{"product_id":"simpli-switch-tongue-and-groove-system-with-case","title":"Simpli-Switch Tongue and Groove System with Case","description":"\u003cp\u003eThe Whiteside Router Bits 360 Simpli‑Switch Tongue and Groove System gives woodworkers twelve precise tongue and groove router bit setups from a single matched set. Built around a 1\/2\" shank and a 1‑5\/8\" large diameter cutter, it replaces multiple dedicated bits while maintaining tight fit and repeatable results.\u003c\/p\u003e\u003cp\u003eThis system solves a common shop problem: dialing in different tongue and groove sizes without stacks of shims or extra cutters. Tongue thickness is controlled by swapping cutters while bearing changes set tongue depth. The result is fast size changes that stay consistent from cut to cut, making it easier to match panels and frames.\u003c\/p\u003e\u003cp\u003eBy combining four tongue thicknesses with three bearing‑controlled depths, the set covers a wide range of joinery needs while keeping setup straightforward. One cutter and one spacer change is all it takes, so workflow stays focused on cutting, not recalibrating.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eProduces twelve tongue and groove size combinations\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour tongue thickness options: 7\/32\", 1\/4\", 5\/16\" and 3\/8\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThree tongue depth settings: 1\/4\", 3\/8\" and 1\/2\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBearing‑controlled depth adjustments\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNo shims or stacked cutters required\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSimpli‑Switch design allows fast configuration changes\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e1\/2\" shank with wrench flats \u0026amp; alignment mark (use when extra reach is needed)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePrecision machining ensures height alignment, seat the bottom of wrench flat against the collet\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e1‑5\/8\" large diameter cutters for stable cutting\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eShank Diameter: 1\/2\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCutter Diameter: 1‑5\/8\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTongue Thicknesses: 7\/32\"\/1\/4\"\/5\/16\"\/3\/8\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTongue Depths: 1\/4\"\/3\/8\"\/1\/2\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRecommended RPM: 12,000-14,000 (Max 16,000)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNumber of Configurations: 12\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAdjustment Method: Cutter and bearing changes\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSet Type: Tongue and groove router bit system\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003e(3) Bearing Sets: 1\/4\", 3\/8”, 1\/2\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(4) Cutters: 7\/32”, 1\/4”, 5\/16”, 3\/8”\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) 1\/2” Tongue Bit\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) 1\/2\" Groove Bit\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Protective Storage Case\u003cbr\u003e \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Whiteside","offers":[{"title":"Default Title","offer_id":49873560469742,"sku":"300006","price":153.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/300006_000_001.jpg?v=1793051478"},{"product_id":"triton-15amp-dual-mode-precision-plunge-router-tra001","title":"Triton 15AMP Dual Mode Precision Plunge Router TRA001","description":"\u003cdiv\u003eTriton TRA001 2400W Dual Mode Precision Plunge Router (Model 523504) delivers powerful performance and advanced control for demanding routing applications both handheld and in router tables. Designed for serious woodworkers, this 3-1\/4 HP router features dual-mode operation, precision depth control, and above-table bit changes for maximum convenience and efficiency.\u003c\/div\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003ePowerful 3-1\/4 HP (15A) motor handles tough hardwoods with ease\u003c\/li\u003e\n\u003cli\u003eDual-mode operation switches from plunge to fixed-base instantly\u003c\/li\u003e\n\u003cli\u003eAbove-table bit changes with single-wrench spindle lock\u003c\/li\u003e\n\u003cli\u003eSoft start and variable speed for controlled, smooth operation\u003c\/li\u003e\n\u003cli\u003eElectronic speed control maintains consistent RPM under load\u003c\/li\u003e\n\u003cli\u003eMicro winder enables ultra-fine depth adjustments\u003c\/li\u003e\n\u003cli\u003eRack-and-pinion height adjustment for precise table routing\u003c\/li\u003e\n\u003cli\u003eRemovable plunge spring for easier table-mounted use\u003c\/li\u003e\n\u003cli\u003eAutomatic spindle lock enhances safety during bit changes\u003c\/li\u003e\n\u003cli\u003e3-stage turret stop for accurate, repeatable depth settings\u003c\/li\u003e\n\u003cli\u003eExcellent dust extraction for cleaner work area\u003c\/li\u003e\n\u003cli\u003eMulti-function fence supports handheld use and circle cutting\u003c\/li\u003e\n\u003cli\u003eSide air vents reduce dust intake when table mounted\u003c\/li\u003e\n\u003cli\u003eQuick-fit pins for fast setup with fence or router table\u003c\/li\u003e\n\u003cli\u003eEasy-access brushes for simple maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003eMotor: 3-1\/4 HP \/ 15 Amp \/ 2400W\u003c\/li\u003e\n\u003cli\u003eSpeed: 8,000 – 21,000 RPM\u003c\/li\u003e\n\u003cli\u003eCollet Capacity: 1\/4\" and 1\/2\"\u003c\/li\u003e\n\u003cli\u003eMaximum Cutter Shank: 1\/2\"\u003c\/li\u003e\n\u003cli\u003ePlunge Range: 2-11\/16\" (68mm)\u003c\/li\u003e\n\u003cli\u003eProduct Height: 12-1\/4\"\u003c\/li\u003e\n\u003cli\u003eProduct Length: 7-1\/8\"\u003c\/li\u003e\n\u003cli\u003eProduct Width: 11-3\/4\"\u003c\/li\u003e\n\u003cli\u003eWeight: 14.3 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003e(1) TRA001 2400W Plunge Router\u003c\/li\u003e\n\u003cli\u003e(1) 1\/4\" Collet\u003c\/li\u003e\n\u003cli\u003e(1) 1\/2\" Collet\u003c\/li\u003e\n\u003cli\u003e(1) Table Height Winder\u003c\/li\u003e\n\u003cli\u003e(1) Multi-Function Fence\u003c\/li\u003e\n\u003cli\u003e(1) Collet Spanner\u003c\/li\u003e\n\u003cli\u003e(1) Instruction Manual\u003c\/li\u003e\n\u003cli\u003e(1) Metal Base\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 5-10 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eWhen returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions.\u003c\/p\u003e\n\u003cp\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eThree year replacement for defective product. Contact Woodcraft Supply customer service @ 1-800-535-4482 with warranty issues on your Triton product.\u003c\/p\u003e\n\u003cp\u003e30 Day Satisfaction Guarantee: If you're not happy with your Triton Workshop Systems product, you can return it for a full refund within 30 days with original receipt. Contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Triton Products","offers":[{"title":"Default Title","offer_id":49873560895726,"sku":"153853","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/153853_000_001.jpg?v=1793051482"},{"product_id":"20v-ionic-drive-2-1-4-peak-hp-plunge-router-bare-tool","title":"20V Ionic Drive 2-1\/4 Peak HP Plunge Router- Bare Tool","description":"\u003cdiv\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\n\u003cdiv\u003eThe Kreg® 20V Ionic Drive™ 2-1\/4 HP Plunge Router delivers cordless routing performance with the control and versatility expected from a full-size plunge router. Built-in above-the-table adjustment works directly with Kreg router tables, eliminating the need for a separate router lift while allowing fast, precise bit-height changes. A brushless motor delivers 2-1\/4 peak HP with variable speed control from 11,000 to 23,000 RPM, helping you match performance to material and bit choice for cleaner results.\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eA 2-5\/8\" plunge depth provides the capacity needed for deep cuts, while three adjustable turret depth stops make repeatable depth settings quick and accurate. Cordless operation removes the limitations of power cords without sacrificing the control needed for edge profiling, joinery and general routing tasks. For optimal performance and runtime, a Kreg® Blue Ion™ 4.0 Ah Battery Pack is recommended. The added capacity helps maintain consistent power during demanding routing applications and extended work sessions.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eDesigned for handheld routing or router table use, this versatile router includes two interchangeable base plates, 1\/4\" and 1\/2\" collets and integrated dust collection. The collet-lock system simplifies bit changes, helping keep projects moving from setup through final pass.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eBuilt-in above-the-table adjustment works with Kreg router tables without a separate lift\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBrushless motor delivers 2-1\/4 HP\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eVariable speed range from 11,000 to 23,000 RPM\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e2-5\/8\" plunge depth for deep routing applications\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThree adjustable turret depth stops for repeatable settings\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes 1\/4\" and 1\/2\" collets\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eStandard sub-base and guide bushing adapter included\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated dust collection helps keep the work area cleaner\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCollet lock enables efficient bit changes\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eMotor Type: Brushless\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePower Output: 2-1\/4 HP\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eVoltage: 20V\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSpeed Range: 11,000-23,000 RPM\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePlunge Depth: 2-5\/8\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCollet Sizes: 1\/4\"\/1\/2\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRecommended Battery: 20V Blue Ion™ 4.0 Ah Battery Pack (Not Included)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDimensions: 8\" L x 12.25\" W x 12.75\" H\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eWeight: 11 lb\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eUPC: 0647096815516\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003e(1) 20V Ionic Drive™ 2-1\/4 HP Plunge Router\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) 1\/4\" Collet\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) 1\/2\" Collet\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(2) Base Plates (Standard Sub-Base and Guide Bushing Adapter)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(2) Collet Wrenches\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Dust Collection Adapter\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Owner's Manual\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e \u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":49873563320558,"sku":"300776","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/300776_000_001.jpg?v=1793051513"},{"product_id":"trim-router-circle-guide","title":"Trim Router Circle Guide","description":"\u003cdiv\u003eThe Kreg Trim Router Circle Guide KRTCG100 allows a trim router to cut accurate circles and smooth arcs with controlled, repeatable results. It controls the router’s pivot point to produce clean, repeatable radius cuts without freehand variation.\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv\u003eThe clear base plate improves visibility of the bit and cut line while adding stability during routing passes. Laser‑etched markings support precise diameter setup, making it easier to repeat cuts across multiple parts without re‑measuring. Pin holes support both interior and exterior diameter cutting, expanding layout options without adding setup complexity.\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv\u003eThis guide makes it easy to cut circles from 3-1\/2\" to 52\" in diameter. When not used for circle cutting, the guide functions as a stable base plate for edge routing. The integrated handle improves control during longer passes, helping maintain steady movement along the workpiece edge. This dual‑purpose design extends trim router capability while keeping the tool compact and manageable.\u003c\/div\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003eCuts precise circles from 3‑1\/2\" to 52\" diameter\u003c\/li\u003e\n\u003cli\u003eSupports interior and exterior diameter cutting\u003c\/li\u003e\n\u003cli\u003eClear base plate improves cut visibility\u003c\/li\u003e\n\u003cli\u003eLaser‑etched markings allow accurate diameter setup\u003c\/li\u003e\n\u003cli\u003eIntegrated handle improves control during routing passes\u003c\/li\u003e\n\u003cli\u003eFunctions as a stable base plate for edge routing\u003c\/li\u003e\n\u003cli\u003eCompatible with most major trim routers\u003c\/li\u003e\n\u003cli\u003e3-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cul\u003e\u003cli\u003eCircle Cutting Capacity: 3‑1\/2\" to 52\" diameter\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat’s Included:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003e(1) Base Plate\u003c\/li\u003e\n\u003cli\u003e(1) Circle Guide\u003c\/li\u003e\n\u003cli\u003e(1) Handle\u003c\/li\u003e\n\u003cli\u003e(1) Circle Guide Pin\u003c\/li\u003e\n\u003cli\u003e(1) Bit Centering Pin\u003c\/li\u003e\n\u003cli\u003e(1) Mounting Hardware Pack\u003c\/li\u003e\n\u003cli\u003e(1) Owner’s Manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":49873567547630,"sku":"198931","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/198931_000_001.jpg?v=1793051575"},{"product_id":"trim-router-edge-guide","title":"Trim Router Edge Guide","description":"\u003cdiv\u003eThe Kreg Trim Router Edge Guide KRTBP150 adds controlled guidance and repeatable accuracy to trim router work that requires consistent spacing from an edge. Designed for broad trim router compatibility, it supports woodworkers who want cleaner, more predictable results when routing without relying on bearing‑guided bits.\u003c\/div\u003e\u003cdiv\u003e\n\u003cbr\u003eThe oversized, one‑piece base plate increases stability during routing passes, helping the router track smoothly along the workpiece edge. An integrated handle improves control during longer cuts, while the adjustable guide setup allows the bit to be positioned accurately without drifting. This makes it well suited for routing dados, grooves and similar edge‑guided operations where control directly affects fit and finish.\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv\u003eIn addition to edge guiding, built‑in pin holes allow the guide to function as a compact circle‑cutting system. The guide supports circle sizes from 3‑1\/2\" to 15\" in diameter, expanding the range of tasks a trim router can handle without switching accessories. Combined edge guidance and circle‑cutting capability make this a flexible addition to a trim router setup focused on accuracy and control.\u003c\/div\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003eGuides router bits accurately along the edge of the workpiece\u003c\/li\u003e\n\u003cli\u003eClear base plate improves cut visibility\u003c\/li\u003e\n\u003cli\u003eAdjustable guide setup maintains consistent spacing during routing\u003c\/li\u003e\n\u003cli\u003ePerfect for dados, grooves, fluting, and inlays\u003c\/li\u003e\n\u003cli\u003eOversized base plate improves stability and control\u003c\/li\u003e\n\u003cli\u003eIntegrated handle enhances grip during extended use\u003c\/li\u003e\n\u003cli\u003eBuilt‑in pin holes support circle cutting from 3‑1\/2\" to 15\" in diameter\u003c\/li\u003e\n\u003cli\u003eOne‑piece construction resists flex during demanding cuts\u003c\/li\u003e\n\u003cli\u003eCompatible with most major trim routers\u003c\/li\u003e\n\u003cli\u003e3-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cul\u003e\u003cli\u003eCircle Cutting Capacity: 3‑1\/2\" to 15\" in diameter\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat’s Included:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003e(1) Trim Router Edge Guide\u003c\/li\u003e\n\u003cli\u003e(1) Base Plate\u003c\/li\u003e\n\u003cli\u003e(1) Handle\u003c\/li\u003e\n\u003cli\u003e(1) Circle Guide Pin\u003c\/li\u003e\n\u003cli\u003e(1) Bit Centering Piece\u003c\/li\u003e\n\u003cli\u003e(1) Mounting Hardware Pack\u003c\/li\u003e\n\u003cli\u003e(1) Owner’s Manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":49873567777006,"sku":"198930","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/198930_000_001.jpg?v=1793051579"},{"product_id":"lx-iii-router-lift","title":"LX:III Router Lift","description":"\u003cdiv\u003eThe Laguna LX3 Router Lift sets a new standard for precision and ease of use in router table setups. Designed to fit standard router table openings, the LX3 features an ultra‑clean anodized aluminum top plate, four heavy‑duty lift posts, and a precision handwheel for smooth, accurate height adjustments. Built to handle a wide range of routers without spacers, the LX3 delivers stability, accuracy, and convenience for demanding routing tasks.\u003c\/div\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003eAnodized aluminum top plate with clean, hole‑free upper surface\u003c\/li\u003e\n\u003cli\u003eFits standard 9‑1\/4\" x 11‑3\/4\" router table openings\u003c\/li\u003e\n\u003cli\u003eMagnetic insert rings with push‑button, tool‑free removal\u003c\/li\u003e\n\u003cli\u003eAdjustable leveling screws for flush insert ring alignment\u003c\/li\u003e\n\u003cli\u003eFour heavy‑duty 3\/4\" Acme‑threaded lift posts for stability\u003c\/li\u003e\n\u003cli\u003eTiming‑belt‑driven geared lift mechanism for smooth operation\u003c\/li\u003e\n\u003cli\u003ePrecision 5\" handwheel for easy height adjustment\u003c\/li\u003e\n\u003cli\u003eFine adjustment scale for precise bit positioning\u003c\/li\u003e\n\u003cli\u003e3‑jaw adjustable clamping system handles a wide range of routers\u003c\/li\u003e\n\u003cli\u003eFour‑corner leveling pads for stable installation\u003c\/li\u003e\n\u003cli\u003eSide tensioners help reduce vibration and ensure proper fit\u003c\/li\u003e\n\u003cli\u003eThreaded top accepts included starter pin for template routing\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003eTop Plate Size: Fits 9‑1\/4\" x 11‑3\/4\" openings\u003c\/li\u003e\n\u003cli\u003eTop Plate Thickness: 3\/8\"\u003c\/li\u003e\n\u003cli\u003eTop Plate Material: Anodized aluminum\u003c\/li\u003e\n\u003cli\u003eLift Posts: Four 3\/4\" Acme‑threaded posts\u003c\/li\u003e\n\u003cli\u003eHeight Adjustment: 1\/16\" per full revolution\u003c\/li\u003e\n\u003cli\u003eAdjustment Scale: 1\/512\" increments (approx. 0.002\")\u003c\/li\u003e\n\u003cli\u003eRouter Diameter Capacity: 3\"–4.3\"\u003c\/li\u003e\n\u003cli\u003eVertical Travel: 4.9\"\u003c\/li\u003e\n\u003cli\u003eInsert Rings Included: 3\u003c\/li\u003e\n\u003cli\u003eLeveling System: Four‑corner leveling pads\u003c\/li\u003e\n\u003cli\u003eClamping System: 3‑jaw adjustable clamp\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003cdiv\u003e\u003cul\u003e\u003cli\u003e(1) Router Lift\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eYour order will ship in approximately \u003cb\u003e4 weeks.\u003c\/b\u003e\n\u003c\/li\u003e \u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e \u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e \u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003cli\u003eLiftgate and Residential Delivery is covered with the excess weight fee, and the freight company will call the day before delivery to set up a time.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003eLaguna does \u003cstrong\u003enot\u003c\/strong\u003e accept returns.  If your shipment was damaged, please refuse delivery, for defective items, please contact Woodcraft Supply customer service @ 1-800-535-4482.\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eNew woodworking machines sold by Laguna Tools carry a two-year warranty effective from the date of shipping. Laguna bandsaw blades' welds are backed by their 1-yr manufacturer's warranty. Machines sold through dealers must be registered with Laguna Tools within 30 days of purchase to be covered by this warranty. Laguna Tools guarantees all new machine sold to be free of manufacturers’ defective workmanship, parts and materials. Laguna Tools will repair or replace, without charge, any parts determined by Laguna Tools, Inc. to be a manufacturer’s defect. They require that the defective item\/part be returned to Laguna Tools with the complaint. In the event the item\/part is determined to be damaged due to lack of maintenance, cleaning or misuse\/abuse, the customer will be responsible for the cost to replace the item\/part, plus all related shipping charges. \u003c\/p\u003e\n\u003cp\u003eFor warranty repair information, call 1-800-332-4094.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Laguna","offers":[{"title":"Default Title","offer_id":49873569841390,"sku":"199450","price":449.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/199450_000_001.jpg?v=1793051609"},{"product_id":"1508-v-groove-router-bit-1-2-sh-1-1-2-d-x-3-4-p-x-2-3-4-ol","title":"1508 V Groove Router Bit 1\/2\" SH 1-1\/2\" D X 3\/4\" P X 2-3\/4\" OL","description":"\u003cdiv\u003eCut shallow and deep grooves for signs or furniture decorations. D = Diameter; CL = Cutting Length; R = Radius; SH = Shank Diameter; OL = Overall Length; P = Point Length; SC = Solid Carbide.\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer:\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 5-10 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product. \u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cp\u003eReturns of Whiteside manufacturer-shipped items are subject to a 15% restocking fee. Returns will be accepted for 60 days.Customer pays return shipping. Please call our Customer Service Dept. at 1-800-535-4482 with any further questions.\u003cbr\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made.\u003c\/p\u003e\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eBecause this item is purchased and shipped directly from the manufacturer, its warranty supercedes any offered by Woodcraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhiteside Product Guarantee:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll Whiteside tools are warranted to be free from defects in workmanship \u0026amp; materials. Warranty is limited to the cost of repair or replacement of the tool. Warranty is void if tools are altered in any way or show signs of abuse or misuse. Whiteside's Customer Service # is 1-800-225-3982.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Whiteside","offers":[{"title":"Default Title","offer_id":49873572856046,"sku":"405461","price":83.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/405461_000_001_ddfc8f7d-ab37-4bac-8297-ead6e0fc32f2.jpg?v=1793051656"},{"product_id":"1504-90-degree-v-groove-router-bit-3-4-cd-3-8-pl-1-2-sh-2-1-4ol","title":"#1504 90 Degree V-Groove Router Bit, 3\/4 CD, 3\/8 PL, 1\/2 SH, 2-1\/4OL","description":"\u003cdiv\u003eWhiteside 90 degree V-groover router bit has a 90 degree  angle v-patterns. Useful for chamfering, veining, fluting, sign making and other decorative pattern work.\u003cbr\u003ePoint Length refers to the depth of cut from the corner of the shoulder to the bit tip. Carbide tipped. Double fluted. Made in the U.S.A.\u003cspan\u003e\u003cp\u003eFeatures:\u003cbr\u003e•  Angle: 90 degree\u003cbr\u003e•   Point Length: 3\/8\"\u003cbr\u003e•  Shank: 1\/2\"\u003cbr\u003e•   Cutting Diameter: 3\/4\"\u003cbr\u003e•  Overall Length: 2-1\/4\"\u003c\/p\u003e\u003c\/span\u003e\n\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer:\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 5-10 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product. \u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cp\u003eReturns of Whiteside manufacturer-shipped items are subject to a 15% restocking fee. Returns will be accepted for 60 days.Customer pays return shipping. Please call our Customer Service Dept. at 1-800-535-4482 with any further questions.\u003cbr\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made.\u003c\/p\u003e\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eBecause this item is purchased and shipped directly from the manufacturer, its warranty supercedes any offered by Woodcraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhiteside Product Guarantee:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll Whiteside tools are warranted to be free from defects in workmanship \u0026amp; materials. Warranty is limited to the cost of repair or replacement of the tool. Warranty is void if tools are altered in any way or show signs of abuse or misuse. Whiteside's Customer Service # is 1-800-225-3982.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Whiteside","offers":[{"title":"Default Title","offer_id":49873573216494,"sku":"24B72","price":45.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/24B72_000_001_5a398229-66f4-4bf5-9d43-c776811e8608.jpg?v=1793051665"},{"product_id":"mast-r-plate","title":"Mast-R-Plate","description":"\u003cdiv\u003eThe JessEm Phenolic Mast-R-Plate is a cost-effective way to reap the benefits of a router table without buying a lift.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003eDesigned to fit all table tops with a 9-1\/4\" x 11-3\/4\" opening, the Mast-R-Plate features a robust stainless steel mounting plate that accommodates more than 20 different motors. It includes above-table holes specifically designed to fit handles for Triton and Milwaukee motors. The mounting plate and underside of the phenolic top plate are laser-engraved to ensure effortless setup and alignment. It comes complete with three insert rings (1-3\/8\", 2\" and 2-1\/2\"), a start pin, an insert wrench and all the necessary mounting hardware for compatible routers, ensuring a smooth and secure installation.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eElevate your router table setup with JessEm’s premium phenolic Mast-R-Plate, where precision meets versatility, and excellence becomes achievable.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eAccommodates more than 20 different motors\u003c\/li\u003e\n\u003cli\u003eFits all table tops with a 9-1\/4\" x 11-3\/4” opening\u003c\/li\u003e\n\u003cli\u003eLaser-engraved mounting plate ensures effortless setup and alignment\u003c\/li\u003e\n\u003cli\u003eAbove-table holes specifically designed to fit handles for Triton and Milwaukee motors\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary mounting hardware, ensuring a smooth and secure installation\u003c\/li\u003e\n\u003cli\u003eMade in Canada\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat’s Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e(1) Mast-R-Plate\u003c\/li\u003e\n\u003cli\u003e(1)   Hardware Pack\u003c\/li\u003e\n\u003cli\u003e(3)   Insert Rings\u003c\/li\u003e\n\u003cli\u003e(1)   Insert Wrench\u003c\/li\u003e\n\u003cli\u003e(1) Starting Pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cp\u003e \u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e","brand":"JessEm","offers":[{"title":"Default Title","offer_id":49873573511406,"sku":"194808","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/194808_000_001.jpg?v=1793051670"},{"product_id":"rout-r-lift-3-5xt","title":"Rout-R-Lift 3.5XT","description":"\u003cp\u003eThe Rout-R-Lift™ 3.5XT is a precision router lift designed to deliver professional results at a practical price point.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eA cost-effective alternative to the Mast-R-Lift II, it offers similar features, including above-table bit height adjustment for quick, accurate setup and a cam-lock mechanism that keeps settings secure during use. Its heavy-duty aluminum body and phenolic top plate provide the stability needed for precise routing work. The result is a straightforward, dependable lift that produces consistent results at the router table.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eOut of the box, it’s sized for the popular 3-1\/2\" diameter fixed-base router motors, but it also includes access to free router sleeve\/collar 3D print files available for smaller routers.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDouble-sealed bearing spindle ensures effortless and accurate raising and lowering of your router motor\u003c\/li\u003e\n\u003cli\u003eShafts are hydraulically pressed into oversized mounts for superior rigidity and long-lasting performance\u003c\/li\u003e\n\u003cli\u003eAbove the table bit changes and height adjustments\u003c\/li\u003e\n\u003cli\u003eDedicated cam-lock mechanism prevents spindle rotation\u003c\/li\u003e\n\u003cli\u003eAluminum body with precision-machined phenolic top plate\u003c\/li\u003e\n\u003cli\u003eSized for the following 3.5\" diameter fixed-base router motors: PORTER-CABLE® 690\/890 series, Bosch 1617\/1618 series, DeWALT® 610\/617\/618 series, CRAFTSMAN® 17540 \/ 17541 \/ 17542 \/ 17543 (320-24604) \/ 27680 \/ 28084 \/ 28190 \/ 320-2768 and SKIL® (3.5\" motor diameter)\u003c\/li\u003e\n\u003cli\u003e3D print files available for the following fixed-base router motors: Milwaukee 65 mm, Kreg 65 mm, DeWALT 2.7\", Hitachi 3.26\" (M12VC \/ KM12VC), Makita 3.2\" (1101), RYOBI 2.4\" and a Generic 2\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTop Plate Dimensions: 9-1\/4\" x 11-3\/4\" x 3\/8\"\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminum with a reinforced CNC-machined phenolic top plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1)   Rout-R-Lift 3.5XT\u003c\/li\u003e\n\u003cli\u003e(3)   Insert Rings: 1-3\/8\", 2\", 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e(1)   Insert Ring Wrench\u003c\/li\u003e\n\u003cli\u003e(1)   Lift Adjustment Handle\u003c\/li\u003e\n\u003cli\u003e(1)   Starting Pin\u003c\/li\u003e\n\u003cli\u003e(1) Hardware Pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"JessEm","offers":[{"title":"Default Title","offer_id":49873573970158,"sku":"198993","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/198993_000_001.jpg?v=1793051677"},{"product_id":"basic-woodworking-package-precision-router-joinery-jig-router-not-included","title":"Basic Woodworking Package - Precision Router Joinery Jig - Router Not Included","description":"\u003cdiv\u003eThis Base Model PantoRouter is meant for manufacturing facilities where it will be set-up for one very specific job and will not be used for different kinds of joinery. The basic model does not include a router, dust collection hood or hose, bits, centering scale fence or table clamps. The base model PantoRouter does contain two sets of mortise and tenon templates, box joint templates and dovetail templates, plus guide bearings and centering jigs. The PantoRouter is manufactured for the North America market with tilting table and 3.5\" diameter router mount. The ideal router for the PantoRouter is the 110V, Bosch 1617 EVS router. This model is for those who already have a PantoRouter® with accessories to be shared with this basic or for those factories with a specific task for the PantoRouter®\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eA router with 3.5\" diameter body must be supplied by the customer\u003c\/li\u003e\n\u003cli\u003eOne box per Basic Model PantoRouter shipment\u003c\/li\u003e\n\u003cli\u003eAssembled footprint – 27”x20”x17”\u003c\/li\u003e\n\u003cli\u003eCut capacity - 8”x4”\u003c\/li\u003e\n\u003cli\u003eCut depth is determined by length of router bit\u003c\/li\u003e\n\u003cli\u003eNo limit to length or width of workpiece as long as it’s supported and can be clamped to the PantoRouter table\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003ePantoRouter kit with tilting-table\u003c\/li\u003e\n\u003cli\u003eHorizontal and vertical mortise and tenon templates (1”, 1-½”, 2”, 2-½” \u0026amp; 3” Horizontal plus 1-1\/2” and 2-½” Vertical)\u003c\/li\u003e\n\u003cli\u003eTemplate Holder (TEM-HOLDER)\u003c\/li\u003e\n\u003cli\u003e22mm guide bearing with 6mm shaft (GB-22)\u003c\/li\u003e\n\u003cli\u003e15mm guide bearing with 6mm shaft (GB-15)\u003c\/li\u003e\n\u003cli\u003e12mm guide bearing with 6mm shaft (GB-12)\u003c\/li\u003e\n\u003cli\u003e10mm guide bearing with 6mm shaft (GB-10)\u003c\/li\u003e\n\u003cli\u003eSegmented box joint templates\u003c\/li\u003e\n\u003cli\u003eVariably Spaced dovetail templates\u003c\/li\u003e\n\u003cli\u003eThickness Gage\u003c\/li\u003e\n\u003cli\u003eDepth Stopper with inch and mm scales\u003c\/li\u003e\n\u003cli\u003eThe Basic PantoRouter does not include the Router, Centering Scale Fence, Clamps, Dust Collection hood or hose.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAll shipments must be inspected and any damage reported within 3 days of receipt.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAddress corrections and cancellations may not be possible once order is submitted.  Requested changes may incur additional charges. \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThis product ships direct from the manufacturer:\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in 7-10 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product. \u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003eAll returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 20% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions.\u003cbr\u003e\n\u003c\/div\u003e","brand":"PantoRouter","offers":[{"title":"Default Title","offer_id":49873574691054,"sku":"191780","price":2045.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/191780_000_001.jpg?v=1793051690"},{"product_id":"pro-woodworking-package-precision-router-joinery-jig-router-included","title":"Pro Woodworking Package - Precision Router Joinery Jig - Router Included","description":"\u003cdiv\u003eThe \"Pro-Pack\" package includes the Tilting Table PantoRouter® woodworking machine and the essential templates, guide bearings and router bits needed to make Mortise and Tenon, Box Joints, and Dovetails, plus a 110 Volt Bosch 1617 EVS router. We include the Dust Collection Hood, the Centering-Scale Fence and two Lever Clamps.\u003c\/div\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBosch 1617EVS router included\u003c\/li\u003e\n\u003cli\u003e21 mortise and tenon sizes plus box joint and variably spaced dovetails\u003c\/li\u003e\n\u003cli\u003eFour carbide bits, clamps, fence, and limited accessories\u003c\/li\u003e\n\u003cli\u003eSuperior dust collection allows bit changes without removing the router\u003c\/li\u003e\n\u003cli\u003eCenter the workpiece without measuring\u003c\/li\u003e\n\u003cli\u003ePatented tapered templates for a perfect fit in minutes\u003c\/li\u003e\n\u003cli\u003eSet-up to glue-up in under 5-minutes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBosch model 1617EVS Included\u003c\/li\u003e\n\u003cli\u003eTwo boxes per PantoRouter shipment\u003c\/li\u003e\n\u003cli\u003eBox 1- 32”x22”x9”, 47lbs\u003c\/li\u003e\n\u003cli\u003eBox 2- 13”x13”x12”, 12lbs\u003c\/li\u003e\n\u003cli\u003eAssembled footprint – 27”x20”x17”\u003c\/li\u003e\n\u003cli\u003eDust port\/hose diameter – 1½”\u003c\/li\u003e\n\u003cli\u003eCut capacity - 8”x4”\u003c\/li\u003e\n\u003cli\u003eCut depth is determined by length of router bit\u003c\/li\u003e\n\u003cli\u003eNo limit to length or width of workpiece as long as it’s supported and can be clamped to the PantoRouter table.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBosch model 1617EVS included\u003c\/li\u003e\n\u003cli\u003eDust Collection Hood\u003c\/li\u003e\n\u003cli\u003eDust Collection Hose - 5ft\u003c\/li\u003e\n\u003cli\u003eCentering Scale Fence\u003c\/li\u003e\n\u003cli\u003eSet of five horizontal mortise and tenon templates 1\", 1-1\/2\", 2\", 2-1\/2\" \u0026amp; 3\"\u003c\/li\u003e\n\u003cli\u003eSet of two vertical mortise and tenon templates 1-1\/2\" and 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eAluminum Template Holder\u003c\/li\u003e\n\u003cli\u003e10mm Guide Bearing with 6mm shaft (GB-10)\u003c\/li\u003e\n\u003cli\u003e12mm Guide Bearing with 6mm shaft (GB-12)\u003c\/li\u003e\n\u003cli\u003e15mm Guide Bearing with 6mm shaft (GB-15)\u003c\/li\u003e\n\u003cli\u003e22mm Guide Bearing with 6mm shaft (GB-22)\u003c\/li\u003e\n\u003cli\u003eTable Front Fences\u003c\/li\u003e\n\u003cli\u003eSplit Shaft Centering jig\u003c\/li\u003e\n\u003cli\u003eAmana 1\/2\" solid carbide spiral up-cut router bit\u003c\/li\u003e\n\u003cli\u003eAmana 3\/8\" solid carbide spiral up-cut router bit\u003c\/li\u003e\n\u003cli\u003eAmana 1\/4\" solid carbide spiral up-cut router bit\u003c\/li\u003e\n\u003cli\u003eAmana 8° X 1\/2” Carbide Tipped Dovetail Bit\u003c\/li\u003e\n\u003cli\u003eSegmented Box Joint Templates\u003c\/li\u003e\n\u003cli\u003eVariable Space Dovetail Templates\u003c\/li\u003e\n\u003cli\u003eThickness Gauge\u003c\/li\u003e\n\u003cli\u003eDepth Stop\u003c\/li\u003e\n\u003cli\u003eTwo T-Track Lever Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAQs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eWhat exactly is included in the Pro Pack package?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe Pro Pack typically includes the Pantorouter machine along with a selection of templates, guides, and accessories to expand its joinery capabilities. It’s designed as a more complete setup for a wide range of projects.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eWhat are the size limitations of the machine?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSize limitations depend on the workholding capacity and travel of the machine, making it best suited for small to medium-sized parts. It excels at precision joinery rather than large panel work.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAll shipments must be inspected and any damage reported within 3 days of receipt.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAddress corrections and cancellations may not be possible once order is submitted.  Requested changes may incur additional charges. \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThis product ships direct from the manufacturer:\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in 7-10 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product. \u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003eAll returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 20% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions.\u003cbr\u003e\n\u003c\/div\u003e","brand":"PantoRouter","offers":[{"title":"Default Title","offer_id":49873574953198,"sku":"191779","price":2395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/191779_000_001.jpg?v=1793051694"},{"product_id":"pro-woodworking-package-precision-router-joinery-jig-router-not-included","title":"Pro Woodworking Package - Precision Router Joinery Jig - Router Not Included","description":"\u003cdiv\u003eThe \"Pro-Pack\" package includes the Tilting Table PantoRouter® woodworking machine and the essential templates, guide bearings and router bits needed to make Mortise and Tenon, Box Joints, and Dovetails. We include the Dust Collection Hood, the Centering-Scale Fence and two Lever Clamps. This package does not include a router. We recommend the customer provides a  Bosch 1617 EVS router for the PantoRouter to operate at full potential.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eThis package DOES NOT include the recommended Bosch 1617EVS router\u003c\/li\u003e\n\u003cli\u003e21 mortise and tenon sizes plus box joint and variably spaced dovetails\u003c\/li\u003e\n\u003cli\u003eFour carbide bits\u003c\/li\u003e\n\u003cli\u003eClamps, fence, and limited accessories\u003c\/li\u003e\n\u003cli\u003eSuperior dust collection allows bit changes without removing the router\u003c\/li\u003e\n\u003cli\u003eCenter the workpiece without measuring\u003c\/li\u003e\n\u003cli\u003ePatented tapered templates for a perfect fit in minutes\u003c\/li\u003e\n\u003cli\u003eSet-up to glue-up in under 5-minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eA router with 3.5\" diameter body must be supplied by the customer\u003c\/li\u003e\n\u003cli\u003eTwo boxes per PantoRouter shipment\u003c\/li\u003e\n\u003cli\u003eBox 1 - 32”x22”x9”, 47lbs\u003c\/li\u003e\n\u003cli\u003eBox 2 - 13”x13”x12”, 12lbs\u003c\/li\u003e\n\u003cli\u003eAssembled footprint – 27”x20”x17”\u003c\/li\u003e\n\u003cli\u003eDust port\/hose diameter – 1½”\u003c\/li\u003e\n\u003cli\u003eCut capacity - 8”x4”\u003c\/li\u003e\n\u003cli\u003eCut depth is determined by length of router bit\u003c\/li\u003e\n\u003cli\u003eNo limit to length or width of workpiece as long as it’s supported and can be clamped to the PantoRouter table.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eThe recommended Bosch model 1617EVS is NOT included\u003c\/li\u003e\n\u003cli\u003eDust Collection Hood\u003c\/li\u003e\n\u003cli\u003eDust Collection Hose - 5ft\u003c\/li\u003e\n\u003cli\u003eCentering Scale Fence\u003c\/li\u003e\n\u003cli\u003eSet of five horizontal mortise and tenon templates 1\", 1-1\/2\", 2\", 2-1\/2\" \u0026amp; 3\"\u003c\/li\u003e\n\u003cli\u003eSet of two vertical mortise and tenon templates 1-1\/2\" and 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eAluminum Template Holder\u003c\/li\u003e\n\u003cli\u003e10mm Guide Bearing with 6mm shaft (GB-10)\u003c\/li\u003e\n\u003cli\u003e12mm Guide Bearing with 6mm shaft (GB-12)\u003c\/li\u003e\n\u003cli\u003e15mm Guide Bearing with 6mm shaft (GB-15)\u003c\/li\u003e\n\u003cli\u003e22mm Guide Bearing with 6mm shaft (GB-22)\u003c\/li\u003e\n\u003cli\u003eTable Front Fences\u003c\/li\u003e\n\u003cli\u003eSplit Shaft Centering jig\u003c\/li\u003e\n\u003cli\u003eAmana 1\/2\" solid carbide spiral up-cut router bit\u003c\/li\u003e\n\u003cli\u003eAmana 3\/8\" solid carbide spiral up-cut router bit\u003c\/li\u003e\n\u003cli\u003eAmana 1\/4\" solid carbide spiral up-cut router bit\u003c\/li\u003e\n\u003cli\u003eAmana 8° X 1\/2” Carbide Tipped Dovetail Bit\u003c\/li\u003e\n\u003cli\u003eSegmented Box Joint Templates\u003c\/li\u003e\n\u003cli\u003eVariable Space Dovetail Templates\u003c\/li\u003e\n\u003cli\u003eThickness Gauge\u003c\/li\u003e\n\u003cli\u003eDepth Stop\u003c\/li\u003e\n\u003cli\u003eTwo T-Track Lever Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAll shipments must be inspected and any damage reported within 3 days of receipt.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAddress corrections and cancellations may not be possible once order is submitted.  Requested changes may incur additional charges. \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThis product ships direct from the manufacturer:\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in 7-10 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product. \u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003eAll returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 20% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions.\u003cbr\u003e\n\u003c\/div\u003e","brand":"PantoRouter","offers":[{"title":"Default Title","offer_id":49873576460526,"sku":"191778","price":2245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/191778_000_001_db467e38-eab1-4ce3-a6db-c1885c053644.jpg?v=1793051719"},{"product_id":"all-in-one-woodworking-package-precision-router-joinery-jig-router-not-included","title":"All-In One Woodworking Package - Precision Router Joinery Jig - Router Not Included","description":"\u003cdiv\u003eThis package includes all of the items needed for basic and advanced woodworking joinery. It does contain all of the most popular items except the router. The customer must supply a router that fits the router mounts such as the Bosch model 1617EVS. We do not include the rotating clamps in this package as many are happy to start with the standard T-track lever clamps then add the style of rotating clamps they prefer later.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eThis package DOES NOT include the recommended Bosch 1617EVS router\u003c\/li\u003e\n\u003cli\u003eOver 150 mortise and tenon sizes plus box joint and variably spaced dovetails\u003c\/li\u003e\n\u003cli\u003eSix carbide bits\u003c\/li\u003e\n\u003cli\u003eClamps, fences, and accessories\u003c\/li\u003e\n\u003cli\u003eSuperior dust collection allows bit changes without removing the router\u003c\/li\u003e\n\u003cli\u003eCenter the workpiece without measuring\u003c\/li\u003e\n\u003cli\u003ePatented tapered templates for a perfect fit in minutes\u003c\/li\u003e\n\u003cli\u003eSet-up to glue-up in under 5-minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eA router with 3.5\" diameter body must be supplied by the customer\u003c\/li\u003e\n\u003cli\u003eTwo boxes per PantoRouter shipment\u003c\/li\u003e\n\u003cli\u003eBox 1 - 32”x22”x9”, 47lbs\u003c\/li\u003e\n\u003cli\u003eBox 2 - 20”x14”x12”, 28lbs\u003c\/li\u003e\n\u003cli\u003eAssembled footprint – 27”x20”x17”\u003c\/li\u003e\n\u003cli\u003eDust port\/hose diameter – 1½”, Cut capacity, 8”x4”\u003c\/li\u003e\n\u003cli\u003eCut depth is determined by length of router bit\u003c\/li\u003e\n\u003cli\u003eNo limit to length or width of workpiece as long as it’s supported and can be clamped to the PantoRouter table\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003ePantoRouter with tilting-table\u003c\/li\u003e\n\u003cli\u003eDust Collection Hood\u003c\/li\u003e\n\u003cli\u003eDust Collection Hose - 5ft\u003c\/li\u003e\n\u003cli\u003eCentering Scale Fence\u003c\/li\u003e\n\u003cli\u003eSwing-Stop for positioning tenon workpieces\u003c\/li\u003e\n\u003cli\u003eVertical template holder adapter\u003c\/li\u003e\n\u003cli\u003eSet of five horizontal mortise and tenon templates 1\", 1-½ \", 2\", 2-½ \" \u0026amp; 3\"\u003c\/li\u003e\n\u003cli\u003eSet of two vertical mortise and tenon templates 1-½ \" and 2-½ \"\u003c\/li\u003e\n\u003cli\u003eAluminum Template Holder\u003c\/li\u003e\n\u003cli\u003e10mm Guide Bearing with 6mm shaft (GB-10)\u003c\/li\u003e\n\u003cli\u003e12mm Guide Bearing with 6mm shaft (GB-12)\u003c\/li\u003e\n\u003cli\u003e15mm Guide Bearing with 6mm shaft (GB-15)\u003c\/li\u003e\n\u003cli\u003e22mm Guide Bearing with 6mm shaft (GB-22)\u003c\/li\u003e\n\u003cli\u003eTable Front Fence\/Stops\u003c\/li\u003e\n\u003cli\u003eSplit Shaft Centering Jig\u003c\/li\u003e\n\u003cli\u003eAmana ½\" solid carbide spiral up-cut router bit with Spektra® coating\u003c\/li\u003e\n\u003cli\u003eAmana ⅜\" solid carbide spiral up-cut router bit\u003c\/li\u003e\n\u003cli\u003eAmana 8° X ½” carbide-tipped dovetail bit\u003c\/li\u003e\n\u003cli\u003eSegmented Box Joint Templates\u003c\/li\u003e\n\u003cli\u003eVariable or Fixed-Space Dovetail Templates\u003c\/li\u003e\n\u003cli\u003eThickness Gauge\u003c\/li\u003e\n\u003cli\u003eDepth Stop\u003c\/li\u003e\n\u003cli\u003eTwo T-Track Lever Clamps\u003c\/li\u003e\n\u003cli\u003eSegmented mortise and tenon template set (makes 154 different sizes of M\u0026amp;T)\u003c\/li\u003e\n\u003cli\u003eSlot mortise template set (all Domino® sizes and any inch or metric size)\u003c\/li\u003e\n\u003cli\u003eMonster mortise and tenon set (¾” and 1” mortise and tenon)\u003c\/li\u003e\n\u003cli\u003eAuxiliary fence (for setting-up angle and compound angle cuts)\u003c\/li\u003e\n\u003cli\u003eDowel templates (4)\u003c\/li\u003e\n\u003cli\u003eDiamond template\u003c\/li\u003e\n\u003cli\u003eBow-Tie template\u003c\/li\u003e\n\u003cli\u003eTriple M\u0026amp;T\u003c\/li\u003e\n\u003cli\u003eAssembly guide\u003c\/li\u003e\n\u003cli\u003eHow-To Guide\u003c\/li\u003e\n\u003cli\u003eCentering Bar for table\u003c\/li\u003e\n\u003cli\u003eTemplate holder micro-adjuster\u003c\/li\u003e\n\u003cli\u003ePantoRouter® center finding ruler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAll shipments must be inspected and any damage reported within 3 days of receipt.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAddress corrections and cancellations may not be possible once order is submitted.  Requested changes may incur additional charges. \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThis product ships direct from the manufacturer:\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in 7-10 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product. \u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003eAll returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 20% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions.\u003cbr\u003e\n\u003c\/div\u003e","brand":"PantoRouter","offers":[{"title":"Default Title","offer_id":49873576755438,"sku":"191777","price":2649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/191777_000_001.jpg?v=1793051724"},{"product_id":"all-in-one-woodworking-package-precision-router-joinery-jig-router-included","title":"All-In One Woodworking Package - Precision Router Joinery Jig - Router Included","description":"\u003cdiv\u003eThis package includes all of the items needed for basic and advanced woodworking joinery and while it doesn’t contain every single accessory made for the PantoRouter®, it does contain all of the most popular items. This Package comes with the Bosch 1617EVS router and is the most complete package we’ve ever offered. We do not include the rotating clamps in this package as many are happy to start with the standard T-track lever clamps then add the style of rotating clamps they prefer later.\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eBosch 1617EVS Router Included\u003c\/li\u003e\n\u003cli\u003eOver 150 Mortise and Tenon Sizes plus Box Joint and Variably Spaced Dovetails\u003c\/li\u003e\n\u003cli\u003eSix Carbide Bits\u003c\/li\u003e\n\u003cli\u003eClamp, Fences, and Accessories\u003c\/li\u003e\n\u003cli\u003eSuperior dust collection allows bit changes without removing the router\u003c\/li\u003e\n\u003cli\u003eCenter the workpiece without measuring\u003c\/li\u003e\n\u003cli\u003ePatented tapered templates for a perfect fit in minutes\u003c\/li\u003e\n\u003cli\u003eSet-up to glue-up in under 5-minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eBosch router 110V, 60hz.\u003c\/li\u003e\n\u003cli\u003eTwo boxes per PantoRouter shipment\u003c\/li\u003e\n\u003cli\u003eBox 1 - 32”x22”x9” 47lbs\u003c\/li\u003e\n\u003cli\u003eBox 2 - 20”x14”x12” 34lbs\u003c\/li\u003e\n\u003cli\u003eAssembled footprint– 27”x20”x17”\u003c\/li\u003e\n\u003cli\u003eDust port\/hose diameter – 1½”, Cut capacity - 8”x4”\u003c\/li\u003e\n\u003cli\u003eCut depth is determined by length of router bit\u003c\/li\u003e\n\u003cli\u003eNo limit to length or width of workpiece as long as it’s supported and can be clamped to the PantoRouter table\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003c\/p\u003e\u003cbr\u003e\u003cdiv\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003ePantoRouter with tilting-table\u003c\/li\u003e\n\u003cli\u003eBosch 1617 EVS Variable Speed\u003c\/li\u003e\n\u003cli\u003e2.25 HP Router, 110 Volt\u003c\/li\u003e\n\u003cli\u003eDust Collection Hood\u003c\/li\u003e\n\u003cli\u003eDust Collection Hose - 5ft\u003c\/li\u003e\n\u003cli\u003eCentering Scale Fence\u003c\/li\u003e\n\u003cli\u003eSwing-Stop for positioning tenon workpieces\u003c\/li\u003e\n\u003cli\u003eVertical template holder adapter\u003c\/li\u003e\n\u003cli\u003eSet of five horizontal mortise and tenon templates 1\", 1-½ \", 2\", 2-½ \" \u0026amp; 3\"\u003c\/li\u003e\n\u003cli\u003eSet of two vertical mortise and tenon templates 1-½ \" and 2-½ \"\u003c\/li\u003e\n\u003cli\u003eAluminum Template Holder\u003c\/li\u003e\n\u003cli\u003e10mm Guide Bearing with 6mm shaft (GB-10)\u003c\/li\u003e\n\u003cli\u003e12mm Guide Bearing with 6mm shaft (GB-12)\u003c\/li\u003e\n\u003cli\u003e15mm Guide Bearing with 6mm shaft (GB-15)\u003c\/li\u003e\n\u003cli\u003e22mm Guide Bearing with 6mm shaft (GB-22)\u003c\/li\u003e\n\u003cli\u003eTable Front Fence\/Stops\u003c\/li\u003e\n\u003cli\u003eSplit Shaft Centering Jig\u003c\/li\u003e\n\u003cli\u003eAmana ½\" solid carbide spiral up-cut router bit with Spektra® coating\u003c\/li\u003e\n\u003cli\u003eAmana ⅜\" solid carbide spiral up-cut router bit\u003c\/li\u003e\n\u003cli\u003eAmana 8° X ½” carbide-tipped dovetail bit\u003c\/li\u003e\n\u003cli\u003eSegmented Box Joint Templates\u003c\/li\u003e\n\u003cli\u003eVariable or Fixed-Space Dovetail Templates\u003c\/li\u003e\n\u003cli\u003eThickness Gauge\u003c\/li\u003e\n\u003cli\u003eDepth Stop\u003c\/li\u003e\n\u003cli\u003eTwo T-Track Lever Clamps\u003c\/li\u003e\n\u003cli\u003eSegmented mortise and tenon template set (makes 154 different sizes of M\u0026amp;T)\u003c\/li\u003e\n\u003cli\u003eSlot mortise template set (all Domino® sizes and any inch or metric size\u003c\/li\u003e\n\u003cli\u003eMonster mortise and tenon set (¾” and 1” mortise and tenon)\u003c\/li\u003e\n\u003cli\u003eAuxiliary fence (for setting-up angle and compound angle cuts)\u003c\/li\u003e\n\u003cli\u003eDowel templates (4)\u003c\/li\u003e\n\u003cli\u003eDiamond template\u003c\/li\u003e\n\u003cli\u003eBow-Tie template\u003c\/li\u003e\n\u003cli\u003eTriple M\u0026amp;T\u003c\/li\u003e\n\u003cli\u003eAssembly guide\u003c\/li\u003e\n\u003cli\u003eHow-To Guide\u003c\/li\u003e\n\u003cli\u003eCentering Bar for table\u003c\/li\u003e\n\u003cli\u003eTemplate holder micro-adjuster\u003c\/li\u003e\n\u003cli\u003ePantoRouter® center finding ruler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAll shipments must be inspected and any damage reported within 3 days of receipt.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAddress corrections and cancellations may not be possible once order is submitted.  Requested changes may incur additional charges. \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThis product ships direct from the manufacturer:\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in 7-10 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product. \u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003eAll returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 20% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions.\u003cbr\u003e\n\u003c\/div\u003e","brand":"PantoRouter","offers":[{"title":"Default Title","offer_id":49873577017582,"sku":"191776","price":2799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/191776_000_001.jpg?v=1793051727"},{"product_id":"ionic-drive-1-4-trim-router-with-2ah-battery-and-charger-kit","title":"Ionic Drive 1\/4\" Trim Router with 2AH Battery and Charger Kit","description":"\u003cdiv\u003eDesigned for detailed woodworking, the Kreg 20V Ionic Drive™ 1\/4\" Trim Router offers exceptional precision in a lightweight, highly maneuverable package. It features a soft-start motor for controlled ramp-up speed, and a rack-and-pinion depth mechanism allows micro-adjustments for exact cuts. Variable speed settings from 10,000 to 30,000 RPM let you match performance to each material and task. A clear, non-marring baseplate and dual LEDs improve visibility, and an integrated dust port keeps the workspace cleaner so you can focus on accuracy. A die-cast base and metal motor housing stand up to demanding use, and sealed buttons add long-term protection. Lightweight and maneuverable, this router makes detailed trimming and shaping easier, with a quick-release base and shaft-lock button for fast bit changes. From edge work to intricate designs, it’s built to give woodworkers confidence and control on every pass.\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVariable speed settings (10,000 – 30,000 RPM) for performance tailored to any material\u003c\/li\u003e\n\u003cli\u003eSmooth rack-and-pinion depth adjacent for micro-precision\u003c\/li\u003e\n\u003cli\u003eDie-cast base and metal motor housing ensure long-lasting durability\u003c\/li\u003e\n\u003cli\u003eIncludes both 1\/4\" and 6 mm collets for added versatility\u003c\/li\u003e\n\u003cli\u003eQuick release base and shaft lock button for fast, simple bit changes\u003c\/li\u003e\n\u003cli\u003eCompact design and rubberized grip make it easy to handle and maneuver\u003c\/li\u003e\n\u003cli\u003eBacked by a 3-year limited warranty \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e(1) 20V Ionic Drive 1\/4\" Trim Router\u003c\/li\u003e\n\u003cli\u003e(1) Dust Adapter\u003c\/li\u003e\n\u003cli\u003e(1) 1\/4\" Collet (Installed)\u003c\/li\u003e\n\u003cli\u003e(1) 6 mm Collet\u003c\/li\u003e\n\u003cli\u003e(1) Template Guide\u003c\/li\u003e\n\u003cli\u003e(1) Collet Wrench\u003c\/li\u003e\n\u003cli\u003e(1) Router Base Wrench\u003c\/li\u003e\n\u003cli\u003e(1) Owner’s Manual\u003c\/li\u003e\n\u003cli\u003e(1) Battery Charger Kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":49873582522606,"sku":"196702BC","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/196702BC_000_001.jpg?v=1793051796"},{"product_id":"trim-router-base-plate","title":"Trim Router Base Plate","description":"\u003cdiv\u003eThe Kreg® Trim Router Base Plate expands the capability of a trim router by providing a larger, more stable platform for routing operations. The increased surface area improves control during edge work and freehand routing, helping reduce tipping while keeping the router balanced on the workpiece.\u003c\/div\u003e\u003cdiv\u003eA clear base design improves visibility around the bit, making it easier to follow layout lines and monitor cuts as they happen. The base plate also supports circle cutting from 3-1\/2\" to 15\" in diameter. Compatible with Kreg trim routers, the base plate installs quickly and adds additional support for routing tasks that benefit from greater stability and control.\u003c\/div\u003e\u003cdiv\u003eAn excellent companion to the Dock \u0026amp; Go™ Trim Router Table system, the base plate helps users get more versatility from a trim router while maintaining a compact, easy-to-handle setup.\u003c\/div\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eIncreases routing stability with a larger support surface\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eClear base improves visibility around the bit and cut line\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSupports circle cuts from 3-1\/2\" to 15\" diameter\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHelps reduce tipping during edge-routing operations\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCompatible with Kreg trim routers\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSupports handheld routing applications\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eComplements the Dock \u0026amp; Go Trim Router Table system\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eProduct Type: Trim Router Base Plate\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCompatibility: Kreg trim routers\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMaterial: Clear polymer\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCircle Cutting Capacity: 3-1\/2\"\/15\" diameter\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRouter Compatibility: Kreg trim routers and most major trim router brands\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003cp\u003e\u003cb\u003eWhat’s Included:\u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cul\u003e\u003cli\u003e\u003cp\u003e(1) Kreg Trim Router Base Plate\u003c\/p\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":49873585012974,"sku":"198929","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/198929_000_001.jpg?v=1793051828"},{"product_id":"router-of-1400-eq-f-plus-combo-starter-set","title":"Router OF 1400 EQ-F-Plus Combo Starter Set","description":"\u003cdiv\u003e\n\u003cdiv\u003eThe Festool Combo-Set OF 1400 EQ-F-Plus Set combines the versatile OF 1400 router with essential accessories that expand routing capability right out of the box. Built around one of Festool's most popular wood routers, this package includes guide rail compatibility, a router bit assortment and dedicated bit storage to help streamline setup and keep frequently used accessories organized. \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eAt the center of the system is the OF 1400 EQ-F-Plus router, designed to handle a wide range of routing applications with precise control and consistent results. The included FS-OF 1400 guide stop improves stability when routing along edges or guide rails, helping maintain accuracy across long cuts. A carbide-tipped router bit assortment broadens the router's capabilities from the start while the SYS3-OF D8\/D12 organizer stores bits securely and keeps them within easy reach. \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eBy combining the OF 1400 router, guide stop, router bit set and dedicated storage into one package, this limited-edition set reduces the need for additional purchases and gets you working faster with a complete routing system. \u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eIncludes OF 1400 EQ-F-Plus Router\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes FS-OF 1400 Guide Stop\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes Box-OF HW S8 Mix router bit assortment\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes SYS3-OF D8\/D12 router bit organizer\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSupports guide rail routing applications\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProvides organized storage for router bits\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eExpands routing capability right out of the box\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDesigned for edge routing, dado work and template routing\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLimited promotional offer, while supplies lasts\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003ePower Consumption: 1,400 W\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNo-Load Speed: 10,000-22,500 RPM\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCollet Capacity: 1\/4\"\/8 mm\/1\/2\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRouting Depth: 2-3\/4\" (70 mm)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFine Adjustment Range: 5\/16\" (8 mm)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMaximum Cutter Diameter: 2-1\/2\" (63 mm)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eWeight: 9.9 lb\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003e(1) OF 1400 EQ-F-Plus Router\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) SYS3-OF D8\/D12 Router Bit Organizer\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Box-OF HW S8 Mix Router Bit Assortment\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) FS-OF 1400 Guide Stop\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":49873585537262,"sku":"579463","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/579463_000_001.jpg?v=1793051837"},{"product_id":"1503-v-groove-router-bit-1-2-sh-1-2-d-x-1-4-p-x-2-ol","title":"1503 V Groove Router Bit 1\/2\" SH 1\/2\" D X 1\/4\" P X 2\" OL","description":"\u003cdiv\u003eV-Groove bits are used for a variety of projects where a standard v-point cut is desired. V-Groove bits are available in 60 and 90 degree tips. Cut shallow and deep grooves for signs or furniture decorations. \u003cbr\u003eD = Diameter; CL = Cutting Length; R = Radius; SH = Shank Diameter; OL = Overall Length; P = Point Length; SC = Solid Carbide. \u003cbr\u003eNote: Products labeled \"Ships Direct from Manufacturer\" are shipped directly from the manufacturer, whose warranty supercedes any offered by Woodcraft. In-stock product will ship within 5 business days. All returns after 30 days are subject to a 25% restocking fee. For details, click on the \"Ships Direct From Manufacturer\" link below.\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer:\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 5-10 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product. \u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cp\u003eReturns of Whiteside manufacturer-shipped items are subject to a 15% restocking fee. Returns will be accepted for 60 days.Customer pays return shipping. Please call our Customer Service Dept. at 1-800-535-4482 with any further questions.\u003cbr\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made.\u003c\/p\u003e\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eBecause this item is purchased and shipped directly from the manufacturer, its warranty supercedes any offered by Woodcraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhiteside Product Guarantee:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll Whiteside tools are warranted to be free from defects in workmanship \u0026amp; materials. Warranty is limited to the cost of repair or replacement of the tool. Warranty is void if tools are altered in any way or show signs of abuse or misuse. Whiteside's Customer Service # is 1-800-225-3982.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Whiteside","offers":[{"title":"Default Title","offer_id":49873586356462,"sku":"405460","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/405460_000_001_9141a9e1-759a-4ade-981c-f4c33d6b09dc.jpg?v=1793051853"},{"product_id":"1501-v-groove-router-bit-1-4-sh-3-8-d-x-3-16-p-x-1-7-8-ol","title":"1501 V Groove Router Bit 1\/4\" SH 3\/8\" D X 3\/16\" P X 1-7\/8\" OL","description":"Whiteside Machine Company has been making top quality router bits since 1970.Using the latest technology, up-to-date machinery, and expert craftsmen, they make a bit that features thick, high grade carbide, accurately ground to produce the smoothest finish cuts on your work. Each bit is inspected after every manufacturing step to ensure satisfaction and consistent quality. This bit is used for cutting shallow and deep grooves for signs or furniture decorations. Cut shallow and deep grooves for signs or furniture decorations. \u003cbr\u003e• Two flutes\u003cbr\u003e• 90 degree Vee \u003cbr\u003e","brand":"Whiteside","offers":[{"title":"Default Title","offer_id":49873586520302,"sku":"24B70","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/24B70_000_001_9200825e-0479-4640-a455-0d31f32cf2c7.jpg?v=1793051856"},{"product_id":"90-degree-v-groove-router-bit-1-4-sh-1-4-cd-1-8-pl","title":"90 Degree V-Groove Router Bit - 1\/4\" SH, 1\/4\" CD, 1\/8\" PL","description":"\u003cp\u003eV-Groove bits are used for a variety of projects where a standard v-point cut is desired. V-Groove bits are available in 60 and 90 degree tips. Cut shallow and deep grooves for signs or furniture decorations.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer:\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 5-10 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product. \u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cp\u003eReturns of Whiteside manufacturer-shipped items are subject to a 15% restocking fee. Returns will be accepted for 60 days.Customer pays return shipping. Please call our Customer Service Dept. at 1-800-535-4482 with any further questions.\u003cbr\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made.\u003c\/p\u003e\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eBecause this item is purchased and shipped directly from the manufacturer, its warranty supercedes any offered by Woodcraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhiteside Product Guarantee:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll Whiteside tools are warranted to be free from defects in workmanship \u0026amp; materials. Warranty is limited to the cost of repair or replacement of the tool. Warranty is void if tools are altered in any way or show signs of abuse or misuse. Whiteside's Customer Service # is 1-800-225-3982.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Whiteside","offers":[{"title":"Default Title","offer_id":49873586651374,"sku":"405459","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/405459_000_001_41052812-8db8-49ca-8479-1a562a2546ee.jpg?v=1793051858"},{"product_id":"1506-90-degree-v-groove-router-bit-1-2-sh-1-d-x-1-2-p-x-2-5-8-ol","title":"1506 90 Degree V Groove Router Bit 1\/2\" SH 1\" D X 1\/2\" P X 2-5\/8\" OL","description":"Whiteside Machine Company has been making top quality router bits since 1970. Using the latest technology, up-to-date machinery, and expert craftsmen, they make a bit that features thick, high grade carbide, accurately ground to produce the smoothest finish cuts on your work. Each bit is inspected after every manufacturing step to ensure satisfaction and consistent quality. This bit is used for cutting shallow and deep grooves for signs or furniture decorations. Cut shallow and deep grooves for signs or furniture decorations\u003cbr\u003e• 1\/2\" Shank\u003cbr\u003e• Two flutes\u003cbr\u003e• 90 degree \u003cbr\u003e• Vee 1” Diameter Cut \u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer:\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 5-10 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product. \u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cp\u003eReturns of Whiteside manufacturer-shipped items are subject to a 15% restocking fee. Returns will be accepted for 60 days.Customer pays return shipping. Please call our Customer Service Dept. at 1-800-535-4482 with any further questions.\u003cbr\u003eIf purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made.\u003c\/p\u003e\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003eBecause this item is purchased and shipped directly from the manufacturer, its warranty supercedes any offered by Woodcraft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhiteside Product Guarantee:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll Whiteside tools are warranted to be free from defects in workmanship \u0026amp; materials. Warranty is limited to the cost of repair or replacement of the tool. Warranty is void if tools are altered in any way or show signs of abuse or misuse. Whiteside's Customer Service # is 1-800-225-3982.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Whiteside","offers":[{"title":"Default Title","offer_id":49873587536110,"sku":"842400","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/842400_000_001_a80a6dca-44e6-49e1-82fc-9b119cfb3b62.jpg?v=1793051873"},{"product_id":"router-of-1400-eq-f-plus","title":"Router OF 1400 EQ‑F‑Plus","description":"\u003cp\u003eThe Festool Router OF 1400 EQ‑F‑Plus delivers high routing power in a balanced, highly controllable platform designed for precise, repeatable results. With 1400 watts of output in a tool weighing under 10 pounds, it covers a wide range of routing tasks while remaining easy to handle for edge work, template routing and plunge cuts.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDual‑sided guide column clamping locks the router body rigidly in place, reducing deflection and keeping cuts accurate from start to finish. A long 2‑3\/4\" plunge stroke supports deeper routing operations and template work without repositioning. Fine depth adjustment accurate to 1\/256\" (0.1 mm) allows precise control when dialing in final cut depth, helping reduce test cuts and rework.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe integrated extraction hood with LED light ring improves visibility at the cutter while supporting effective dust extraction when connected to a Festool dust extractor. Tool‑free base plate and template guide changes speed transitions between tasks, and the ratcheting spindle stop simplifies bit changes without removing the wrench. Variable-speed control and MMC electronics maintain consistent cutter speed across materials for smooth routing performance.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1400W motor delivers strong cutting power in a compact form\u003c\/li\u003e\n\u003cli\u003eDual‑sided guide column clamping improves stability and accuracy\u003c\/li\u003e\n\u003cli\u003e2‑3\/4\" (70 mm) plunge stroke supports deep routing and template work\u003c\/li\u003e\n\u003cli\u003eFine depth adjustment accurate to 1\/256\" (0.1 mm)\u003c\/li\u003e\n\u003cli\u003eIntegrated LED light ring improves visibility at the cut\u003c\/li\u003e\n\u003cli\u003eTool‑free base plate and template guide changes\u003c\/li\u003e\n\u003cli\u003eRatcheting spindle stop simplifies bit changes\u003c\/li\u003e\n\u003cli\u003eVariable speed with electronic speed control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTool Type: Plunge Router\u003c\/li\u003e\n\u003cli\u003ePower Source: Corded\u003c\/li\u003e\n\u003cli\u003eVoltage: 120V\u003c\/li\u003e\n\u003cli\u003eMotor Output: 1400W\u003c\/li\u003e\n\u003cli\u003ePlunge Depth: 2‑3\/4\" (70 mm)\u003c\/li\u003e\n\u003cli\u003eDepth Adjustment Resolution: 1\/256\" (0.1 mm)\u003c\/li\u003e\n\u003cli\u003eCollet Sizes Included: 1\/4\" (6.35 mm), 8 mm, 1\/2\" (12.7 mm)\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtraction Hood with Light Module LM‑OF 1400\u003c\/li\u003e\n\u003cli\u003eChip Catcher\u003c\/li\u003e\n\u003cli\u003e1\/4\" Collet (6.35 mm)\u003c\/li\u003e\n\u003cli\u003e8 mm Collet\u003c\/li\u003e\n\u003cli\u003e1\/2\" Collet (12.7 mm)\u003c\/li\u003e\n\u003cli\u003eOpen‑Ended Wrench\u003c\/li\u003e\n\u003cli\u003ePlug‑It Power Cable 4 m\u003c\/li\u003e\n\u003cli\u003eSystainer SYS3 M 337\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":49873588257006,"sku":"578951","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/578951_000_001.jpg?v=1793051883"},{"product_id":"flush-trim-router-bit-1-4-sh-x-1-2-d-x-1-1-8-cl","title":"Flush Trim Router Bit - 1\/4\" SH x 1\/2\" D x 1-1\/8\" CL","description":"\u003cp\u003eThis 1\/4\" bit pairs with the Kreg® Corner Routing Guide Set to make perfect corner profiles with any router. Featuring a top and bottom bearing, this bit can be used in a handheld router or in a router table. Cutting diameter is 1\/2\" with a cutting length of 1-1\/8\".\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eFor use with the Kreg Corner Routing Guide (sold separately)\u003c\/li\u003e\n\u003cli\u003eTop and bottom bearings allow for use in a handheld or trim router or a router table\u003c\/li\u003e\n\u003cli\u003eDual carbide-tipped blades leave a smooth finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShank: 1\/4\"\u003c\/li\u003e\n\u003cli\u003eCutting Length: 1-1\/8\"\u003c\/li\u003e\n\u003cli\u003eCutting Diameter: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eOverall Length: 3-7\/16\"\u003c\/li\u003e\n\u003cli\u003eMaximum Speed: 24,000 RPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e(1) Flush-Trim Bit - 1\/4\" Shank x 1\/2\" Cutting Diamter x 1-1\/8\" Cutting Length\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":49873588814062,"sku":"186092","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/186092_000_001.jpg?v=1793051893"},{"product_id":"1-1-4-hp-variable-speed-trim-router","title":"1-1\/4 HP Variable-Speed Trim Router","description":"\u003cdiv\u003e\n\u003cdiv\u003eThe Kreg PRSPR125 1-1\/4 HP 1\/4\" Trim Router (Corded) delivers the power and control expected from a professional-grade wood router in a compact format that is easy to handle during edge profiling, trimming and template-guided work. A 6.5-amp motor produces 1-1\/4 HP and is paired with six variable speed settings to match cutting speed to the material and bit being used.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eSoft-start technology reduces startup torque, helping maintain control from the moment the motor engages. The quick-release base simplifies depth adjustments and motor removal, reducing interruptions during setup changes. A clear base and included dust adapter help maintain visibility at the cut line, making it easier to follow layout marks and achieve consistent results.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eUnlike many compact wood routers, this model comes ready for a wide range of routing tasks right out of the box. Included 1\/4\" and 6 mm collets accommodate common bit sizes, while the template guide bushing expands the capability of the router tool for pattern work and repeatable cuts. The growing Kreg routing accessory system provides a foundation that can expand alongside future shop needs.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003e1-1\/4 HP, 6.5-amp AC motor\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSix variable speed settings from 16,000 to 32,000 RPM\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSoft-start motor reduces startup torque\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eQuick-release base enables fast depth adjustments\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCollet lock allows single-wrench bit changes\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes 1\/4\" and 6 mm collets\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes template guide bushing\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eClear base improves cut-line visibility\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes 1-1\/4\" dust port adapter\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCompatible with Kreg routing accessories\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eMotor Power: 1-1\/4 HP\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMotor Current: 6.5 A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCollet Capacity: 1\/4\"\/6 mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSpeed Range: 16,000-32,000 RPM\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDust Port Size: 1-1\/4\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProduct Length: 9.22\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProduct Width: 7.31\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProduct Height: 4.10\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProduct Weight: 4.63 lb\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eUPC: 0647096815554\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e(1) 1\/4\" Trim Router\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Dust Adapter\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) 1\/4\" Collet (Installed)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) 6 mm Collet\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Template Guide\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Collet Wrench\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Router Base Wrench\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Owner's Manua\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":49873590780142,"sku":"199960","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/199960_000_001.jpg?v=1793051923"},{"product_id":"compact-router-bit-set-1-4-shank-4-piece","title":"Compact Router Bit Set - 1\/4\" Shank - 4 Piece","description":"\u003cp\u003eWhiteside Machine Company, well known for its high quality router bits, offers four of its most popular bits in this starter set that is a necessity for any shop. Set includes four 1\/4\"-shank router bits – Template Bit, 45° Chamfer Bit, 1\/8\" Round-Over Bit, and Flush-Trim Bit. A special feature is the 45° Chamfer Bit that is designed to fit into compact routers and to fit through the bottom plate without touching the sides. \u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eConvenient, 1\/4\"-shank router bit set with four of the most popular bits\u003c\/li\u003e\n\u003cli\u003eIdeal for compact 1\/4\"-shank routers and laminate trimmers\u003c\/li\u003e\n\u003cli\u003ePrecise cutting edges help achieve high-quality results\u003c\/li\u003e\n\u003cli\u003eComes in a plastic storage box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShank Diameter: 1\/4\"\u003c\/li\u003e\n\u003cli\u003e1\/8\" Round-Over Bit: 1\/2\" Cutting Length, 3\/4\" Large Diameter\u003c\/li\u003e\n\u003cli\u003eFlush-Trim Bit: 1\/2\" Cutting Depth, 1\" Cutting Length\u003c\/li\u003e\n\u003cli\u003e45° Chamfer Bit: 7\/16\" Cutting Length, 1\" Large Diameter\u003c\/li\u003e\n\u003cli\u003eTemplate Bit: 1\/2\" Cutting Depth, 1\" Cutting Length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Template Bit - Whiteside #2000C\u003c\/li\u003e\n\u003cli\u003e(1) 45° Chamfer Bit - Whiteside #2292\u003c\/li\u003e\n\u003cli\u003e(1) 1\/8\" Roundover Bit - Whiteside #3004\u003c\/li\u003e\n\u003cli\u003e(1) Flush Trim Bit - Whiteside #2402\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Whiteside","offers":[{"title":"Default Title","offer_id":49873594319086,"sku":"158806","price":103.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/158806_000_001.jpg?v=1793051952"},{"product_id":"20v-ionic-drive™-2-1-4-hp-plunge-router-kit","title":"20V Ionic Drive™ 2 -1\/4 HP Plunge Router Kit","description":"\u003cdiv\u003e\n\u003cdiv\u003eThe Kreg® 20V Ionic Drive™ 2-1\/4 HP Plunge Router Kit delivers cordless routing performance with the control and adjustment woodworkers expect in a router table setup. Built around Kreg’s Ionic Drive system, this router removes the limitations of a cord while maintaining the power needed for shaping, trimming and edge work.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eA brushless motor produces 2-1\/4 HP with a variable speed range from 11,000 to 23,000 RPM, giving you control across different router bits and materials. Above-table bit height adjustment is built into the design, allowing precise changes without removing the router from a table. This reduces interruption during setup and keeps workflow consistent when making repeated adjustments. The 2-5\/8\" plunge depth supports deeper cuts in a single pass, helping maintain accuracy without constant repositioning. Three turret depth stops provide repeatable settings that stay consistent across multiple cuts.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe included battery system supports cordless operation without sacrificing output. This allows greater freedom of movement around large workpieces and eliminates cord interference during routing. Two base plates support both standard routing and template work, extending the range of applications handled by a single tool.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eAbove-table adjustment built into the router for table use without a lift\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBrushless motor produces 2-1\/4 HP for consistent routing performance\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eVariable speed range supports control across different router bits and materials\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e2-5\/8\" plunge capacity supports deeper cutting passes\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThree adjustable turret stops for repeatable depth settings\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes standard sub-base and guide bushing adapter\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated dust collection port\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCordless 20V Ionic Drive system removes cord restrictions\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eMotor Power: 2-1\/4 HP\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eVoltage: 20 V\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSpeed Range: 11,000–23,000 RPM\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePlunge Depth: 2-5\/8\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCollet Sizes: 1\/4\" \/ 1\/2\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMotor Type: Brushless\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBase Type: Plunge\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e(1) Plunge Router\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Standard Sub-Base\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Guide Bushing Adapter\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) 1\/4\" Collet\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) 1\/2\" Collet\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Wrench Set\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) 4.0 Ah Battery Pack\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Battery Charger\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":49873597923566,"sku":"199962","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/199962_000_001.jpg?v=1793052000"},{"product_id":"miniature-joint-template-kit-for-4200-series-dovetail-jigs","title":"Miniature Joint Template Kit For 4200 Series Dovetail Jigs","description":"\u003cp\u003ePorter Cable® Model 4215 - Miniature Joint Template Kit is an accessory template for the basic Porter-Cable Model 4210 and Model 4212 Dovetail Jigs to rout miniature half-blind and through dovetail joints and miniature box joints. Includes template, dovetail bit, straight bit, (2) template guide bushings, wrench and instruction manual.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTemplate kit for 4200 Series dovetail jigs\u003c\/li\u003e\n\u003cli\u003eReplacement Part for Model 4216\u003c\/li\u003e\n\u003cli\u003eAccessory for Models 4210 and 4212 Dovetail Jigs\u003c\/li\u003e\n\u003cli\u003eEnables miniature half-blind, through dovetails and miniature box joints to be cut\u003c\/li\u003e\n\u003cli\u003eRequires 1\/4\" straight bit (sold separately)\u003c\/li\u003e\n\u003cli\u003eDovetail Jig is not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Miniature Joint Template \u003c\/li\u003e\n\u003cli\u003e(1) Dovetail bit\u003c\/li\u003e\n\u003cli\u003e(1) Straight bit\u003c\/li\u003e\n\u003cli\u003e(2) Template guide bushings\u003c\/li\u003e\n\u003cli\u003e(1) Wrench \u003c\/li\u003e\n\u003cli\u003e(1) Instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eRequires a 1\/4\" straight bit and the Porter-Cable 4200 Series Dovetail Jig (both sold separately)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\n\u003ch3\u003eShipping \/ Billing Information \u003c\/h3\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis product ships direct from the manufacturer: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYour order will ship in approximately 5 business days. \u003c\/li\u003e\n\u003cli\u003eThis product is considered special order. Your account will be charged when you place your order. \u003c\/li\u003e\n\u003cli\u003eExpress or overnight shipping is not available for this product.\u003c\/li\u003e\n\u003cli\u003eShips by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e Return Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cp\u003eContact Customer Service at 800-535-4482 for information on returns. Non-defective returns may be subject to a 20% restocking fee and return freight.\u003c\/p\u003e\u003c\/div\u003e\u003cp\u003e\u003cb\u003e Warranty Information \u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cp\u003ePORTER-CABLE CORPORATION warrants to the original purchaser that all products covered under this warranty are free from defects in material and workmanship. Products covered under this warranty include air compressors, air tools, service parts, pressure washers, and generators, which have the following warranty periods: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3 YEARS - Limited warranty on 2-stage oil-free air compressor pumps that operate at 1725 RPM. \u003c\/li\u003e\n\u003cli\u003e2 YEARS - Limited warranty on oil-lubricated air compressor pumps. \u003c\/li\u003e\n\u003cli\u003e1 YEAR - Limited warranty on all other air compressor components. \u003c\/li\u003e\n\u003cli\u003e2 YEARS - Limited warranty on electric generator alternators. \u003c\/li\u003e\n\u003cli\u003e1 YEAR - Limited warranty on other generator components. \u003c\/li\u003e\n\u003cli\u003e2 YEARS - Limited warranty on pneumatic air tools. \u003c\/li\u003e\n\u003cli\u003e1 YEAR - Limited warranty on pressure washers used in consumer applications (i.e. personal residential household usage only). \u003c\/li\u003e\n\u003cli\u003e90 DAY - Pressure washers used for commercial applications (income producing) and service parts. \u003c\/li\u003e\n\u003cli\u003e1 YEAR - Limited warranty on all accessories. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePorter-Cable will repair or replace, at Porter-Cable's option, products or components which have failed within the warranty period. Service will be scheduled according to the normal work flow and business hours at the service center location, and the availability of replacement parts. All decisions of Porter-Cable Corporation with regard to this limited warranty shall be final. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.\u003c\/p\u003e\n\u003cp\u003eRESPONSIBILITY OF ORIGINAL PURCHASER (initial User): \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTo process a warranty claim on this product, DO NOT return it to the retailer. The product must be evaluated by a Porter-Cable Authorized Warranty Service Center. For the location of the nearest Porter-Cable Authorized Warranty Service Center call 1-888-559-8550, 24 hours a day, 7 days a week. \u003c\/li\u003e\n\u003cli\u003eRetain original cash register sales receipt as proof of purchase for warranty work. \u003c\/li\u003e\n\u003cli\u003eUse reasonable care in the operation and maintenance of the product as described in the Owner’s Manual(s). \u003c\/li\u003e\n\u003cli\u003eDeliver or ship the product to the nearest Porter-Cable Authorized Warranty Service Center. Freight costs, if any, must be paid by the purchaser. \u003c\/li\u003e\n\u003cli\u003eAir compressors with 60 and 80 gallon tanks will be inspected at the site of installation. Contact the nearest Porter-Cable Authorized Warranty Service Center that provides on-site service calls, for service call arrangements. \u003c\/li\u003e\n\u003cli\u003eIf the purchaser does not receive satisfactory results from the Porter-Cable Authorized Warranty Service Center, the purchaser should contact Porter-Cable. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTHIS WARRANTY DOES NOT COVER:\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Porter Cable","offers":[{"title":"Default Title","offer_id":49873597989102,"sku":"830583","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/830583_000_001.jpg?v=1793052001"},{"product_id":"2-1-4-hp-plunge-router","title":"2-1\/4 HP Plunge Router","description":"\u003cdiv\u003e\n\u003cdiv\u003eThe Kreg® 2-1\/4 HP Plunge Router gives woodworkers a single solution for both handheld routing and router table setups. Built for users who expect consistent cut quality and accurate adjustment, this router brings above-table bit height control into a compact plunge design.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eA 12-amp motor delivers steady cutting power while an integrated speed sensor continuously monitors load and adjusts RPM. The result shows up at the cut line with cleaner edges and less variation when working with different materials or larger router bits. Variable speed control lets you match speed to bit size and stock density, helping maintain control and reduce tearout during shaping, trimming and edge work. The 2-5\/8\" plunge capacity supports deeper passes without repositioning, which improves efficiency on repeated cuts. Soft start reduces startup torque so the router stays controlled from the moment it engages material.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eCompatibility with the Kreg Router Lift adds flexibility for router table use, allowing above-table adjustments without removing the motor. Included base plates support both standard routing and template work, expanding the range of tasks the tool can handle.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eBuilt-in speed sensor adjusts RPM under load for consistent cutting performance\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eVariable speed range supports control across different router bits and materials\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSoft start reduces torque at startup for improved handling\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAbove-table bit height adjustment capability for router table setups\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCompatible with Kreg Router Lift PRS5000\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes standard sub-base and guide bushing adapter\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e2-5\/8\" plunge depth supports deeper cutting passes\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCollet lock allows secure bit changes\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated dust collection attachment\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eMotor Power: 2-1\/4 HP\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAmperage: 12 A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSpeed Range: 10,000–25,000 RPM\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePlunge Depth: 2-5\/8\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCollet Sizes: 1\/4\" \/ 1\/2\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBase Type: Plunge\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e(1) Plunge Router\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Standard Sub-Base\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Guide Bushing Adapter\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) 1\/4\" Collet\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) 1\/2\" Collet\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Wrench\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":49873599037678,"sku":"199961","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/199961_000_001.jpg?v=1793052018"},{"product_id":"extraction-hood-with-integrated-light-module-lm-of1400","title":"Extraction Hood with Integrated Light Module LM‑OF1400","description":"\u003cdiv\u003e\n\u003cdiv\u003eThe Festool Extraction Hood with Light Module LM‑OF1400 improves routing accuracy by combining shadow‑free illumination with effective dust extraction directly at the cut. Designed for all Festool OF 1400 routers, it keeps the cutting area clearly visible while helping maintain a cleaner workspace during routing operations.\u003c\/div\u003e\n\u003cdiv\u003eThe integrated LED light module delivers 360° illumination around the router bit, reducing shadows that can obscure layout lines and cutting edges. Two selectable brightness levels allow adjustment to changing lighting conditions, helping maintain consistent visibility across different work environments. Because the light sits close to the cutter, visibility stays clear even when routing deeper profiles or working close to edges.\u003c\/div\u003e\n\u003cdiv\u003eDust extraction at the routing area helps keep the cut line visible and reduces airborne debris. The hood installs without tools and locks securely to the router base, making it easy to add or remove as needed. A built‑in rechargeable battery powers the light independently of the router, delivering up to 6 hours of runtime and recharging via USB‑C®.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e360° LED illumination provides shadow‑free visibility at the cutter\u003c\/li\u003e\n\u003cli\u003eTwo brightness levels adapt to varying lighting conditions\u003c\/li\u003e\n\u003cli\u003eIntegrated dust extraction keeps the cut line clear\u003c\/li\u003e\n\u003cli\u003eTool‑free installation and removal from the router base\u003c\/li\u003e\n\u003cli\u003eCompatible with all Festool OF1400 routers, including earlier models\u003c\/li\u003e\n\u003cli\u003eRechargeable battery delivers up to 6 hours of runtime\u003c\/li\u003e\n\u003cli\u003eUSB‑C charging supports standard charging cables\u003c\/li\u003e\n\u003cli\u003eSecure bayonet‑style hose connection prevents accidental disconnection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Type: Extraction Hood with Light Module\u003c\/li\u003e\n\u003cli\u003eCompatibility: Festool OF 1400 Routers\u003c\/li\u003e\n\u003cli\u003eLighting Coverage: 360°\u003c\/li\u003e\n\u003cli\u003eBrightness Levels: 2\u003c\/li\u003e\n\u003cli\u003ePower Source: Integrated Rechargeable Battery\u003c\/li\u003e\n\u003cli\u003eCharging Port: USB‑C®\u003c\/li\u003e\n\u003cli\u003eRuntime: Up to 6 hours\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: China\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included:\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eExtraction Hood with Integrated Light Module LM‑OF1400\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":49873600512238,"sku":"578683","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/578683_000_001.jpg?v=1793052044"},{"product_id":"box-joint-jig","title":"Box Joint Jig","description":"\u003cdiv\u003eCut flawless box joints every time with the JessEm Box Joint Jig, precision-engineered for accuracy and smooth performance on your router table. Create drawers, keepsake boxes or tight joinery with confidence and consistency, minus the frustration of complex setups.\u003c\/div\u003e\u003cp\u003eWith three interchangeable key sizes (1\/4\", 3\/8\", 1\/2\") and three matching Baltic Birch fences, you'll be ready to tackle a wide variety of project sizes right out of the box. The jig glides effortlessly on four R4 bearings for smooth, precise cuts.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDesigned for ease of use and versatility, this jig allows full access to raise and lower your router bit, then securely lock your router lift in place—all without ever moving your plate. When you're done, just hang the jig on your shop wall until inspiration strikes again\u003c\/p\u003e\u003cp\u003eThe JessEm Box Joint Jig is built to deliver maximum precision with minimal setup. It’s not just a jig; it’s your new standard for precision joinery.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eThree interchangeable key sizes (1\/4\", 3\/8\", 1\/2\")\u003c\/li\u003e\n\u003cli\u003eMatching Baltic Birch fences sized for each key\u003c\/li\u003e\n\u003cli\u003eFour R4 bearings deliver smooth, controlled movement\u003c\/li\u003e\n\u003cli\u003eAdjustable bit guard keeps cuts steady and secure\u003c\/li\u003e\n\u003cli\u003e4-1\/4\" travel allows full access to your router lift for easy bit height changes and a firm lift lock without removing the base plate\u003c\/li\u003e\n\u003cli\u003eWall-mount design lets you hang it up for space-saving storage\u003c\/li\u003e\n\u003cli\u003eRouter bits sold separately\u003c\/li\u003e\n\u003cli\u003eMade in Canada\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cb\u003eWhat's Included:\u003c\/b\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003e(1) Box Joint Jig\u003c\/li\u003e\n\u003cli\u003e(3) Indexing Keys (1\/4\", 3\/8\", 1\/2\")\u003c\/li\u003e\n\u003cli\u003e(3) Baltic birch Fences (1\/4\", 3\/8\", 1\/2\")\u003c\/li\u003e\n\u003cli\u003eAssorted hex wrenches\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e","brand":"JessEm","offers":[{"title":"Default Title","offer_id":49873600545006,"sku":"196956","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/196956_000_001.jpg?v=1793052044"},{"product_id":"3-1-4-hp-surespeed™-fixed-base-router-motor","title":"3-1\/4 HP SureSpeed™ Fixed-Base Router Motor","description":"\u003cdiv\u003e\n\u003cdiv\u003eThe Kreg® 3-1\/4 HP SureSpeed™ Fixed-Base Router Motor is built for woodworkers who run a router table or lift and want sustained cutting power without a base assembly. This standalone motor drops directly into compatible systems including the Kreg PRS5000 Router Lift, keeping setups simple while delivering consistent performance under load.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eA 3-1\/4 HP, 15-amp motor uses active speed sensing to maintain stable RPM as resistance increases. This keeps cuts uniform when working with dense stock or large bits. Five variable speed settings from 10,000 to 21,000 RPM let you match cutter speed to material and diameter, reducing burn marks and improving control across a range of routing tasks.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eSoft start reduces startup torque so the motor engages smoothly without shifting the setup. Fine adjustment with 1\/64\" graduations supports repeatable depth changes, which is critical for consistent results during multi-pass work. Designed specifically for router tables and lift systems, this motor provides a direct upgrade path without reconfiguring your workflow.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003e3-1\/4 HP, 15-amp motor delivers sustained cutting power\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSpeed sensor maintains consistent RPM under load\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFive variable speed settings from 10,000–21,000 RPM\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSoft start reduces startup torque\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFine adjustment ring with 1\/64\" graduations\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFits Kreg Router Lift PRS5000\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eMotor Power: 3-1\/4 HP\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAmperage: 15 A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSpeed Range: 10,000–21,000 RPM\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSpeed Settings: 5\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAdjustment Increment: 1\/64\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCompatibility: PRS5000 Router Lift\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e(1) Router motor\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) 1\/4\" collet\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) 1\/2\" collet\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Collet wrench\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Guide bushing adapter\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":49873600741614,"sku":"199210","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/199210_000_001.jpg?v=1793052048"},{"product_id":"3-1-4-hp-surespeed™-fixed-base-router","title":"3-1\/4 HP SureSpeed™ Fixed-Base Router","description":"\u003cdiv\u003e\n\u003cdiv\u003eThe Kreg® 3-1\/4 HP SureSpeed™ Fixed-Base Router is built for woodworkers who need steady cutting performance in both handheld use and router table setups. A 3-1\/4 HP motor with integrated speed sensing maintains consistent RPM under load so cuts stay clean and controlled through dense material and large diameter bits.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eVariable speed control from 10,000 to 21,000 RPM lets you match cutter speed to the task while the soft-start motor reduces torque surge at startup. A fine adjustment ring with 1\/64\" graduation supports repeatable depth settings, which is critical for consistent results across multiple passes or production runs. Compatibility with Kreg router tables and the PRS5000 router lift allows above-table adjustment without interrupting workflow.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eDesigned to move easily between freehand routing and a router table, this motor platform eliminates the need to reconfigure setups. Included collets and guide bushing support expand capability across shaping, trimming and template routing, while maintaining control and accuracy across a wide range of operations.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003e3-1\/4 HP, 15-amp motor maintains consistent RPM under load\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eVariable speed control from 10,000 to 21,000 RPM\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated speed sensor adjusts power to cutting conditions\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSoft-start motor reduces startup torque\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFine adjustment ring with 1\/64\" depth increments\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCompatible with Kreg router tables PRS1045 and PRS2100\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFits PRS5000 router lift for above-table adjustment\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes guide bushing adapter for template routing\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAccepts both 1\/4\" and 1\/2\" collets\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eMotor Power: 3-1\/4 HP\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAmperage: 15 A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSpeed Range: 10,000–21,000 RPM\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCollet Sizes: 1\/4\"\/1\/2\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAdjustment Increment: 1\/64\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCompatibility: Kreg Router Tables PRS1045\/PRS2100, PRS5000 Lift\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e(1) Fixed-base motor\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) 1\/4\" collet\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) 1\/2\" collet\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(2) Collet wrenches\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Guide bushing adapter\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Standard sub-base plate\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":49873600839918,"sku":"199209","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/199209_000_001.jpg?v=1793052051"},{"product_id":"roundover-bit-hw-r3-ofk-500-z1","title":"Roundover Bit HW R3‑OFK 500 Z1","description":"\u003cdiv\u003e\n\u003cdiv\u003eThe Festool Roundover Bit HW R3‑OFK 500 Z1 is designed for clean, controlled edge profiling on small and delicate workpieces. It is optimized for use with the OFKC 500 cordless edge router, delivering smooth, consistent round‑over results on solid wood and plastic edge banding without excess heat buildup.\u003c\/div\u003e\n\u003cdiv\u003eThe single‑flute cutter design reduces friction during routing, helping limit burn marks and maintain surface quality, especially when working across the grain. A collet‑free hollow‑shaft mount threads directly onto the router spindle, minimizing run‑out and improving cut accuracy while eliminating the need for a collet. The flush‑mounted bearing keeps the cutter height low, allowing clean routing in rabbets or across stacked panels where clearance is limited.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle‑flute cutter reduces heat buildup during edge profiling\u003c\/li\u003e\n\u003cli\u003eRound‑over profile produces clean, consistent edge shaping\u003c\/li\u003e\n\u003cli\u003ePrecision‑matched radius aligns accurately with bearing guidance\u003c\/li\u003e\n\u003cli\u003eCollet‑free hollow‑shaft design mounts directly to the router spindle\u003c\/li\u003e\n\u003cli\u003eLow installation height supports routing in rabbets and tight clearances\u003c\/li\u003e\n\u003cli\u003eRelief angle transition helps reduce surface marking at exit points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTool Type: Roundover Bit\u003c\/li\u003e\n\u003cli\u003eProduct Group: Consumable\u003c\/li\u003e\n\u003cli\u003eCutter Design: Single Cutter\u003c\/li\u003e\n\u003cli\u003eMounting Style: Collet‑Free Hollow Shaft\u003c\/li\u003e\n\u003cli\u003eBearing Included: No\u003c\/li\u003e\n\u003cli\u003eCompatible Router: OFKC 500\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Austria\u003c\/li\u003e\n\u003cli\u003eWeight: 0.19 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included:\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eRoundover Bit HW R3‑OFK 500 Z1\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":49873601069294,"sku":"578378","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/578378_000_001.jpg?v=1793052055"},{"product_id":"roundover-bit-hw-r2-ofk-500-z1","title":"Roundover Bit HW R2‑OFK 500 Z1","description":"\u003cdiv\u003e\n\u003cdiv\u003eThe\u003cstrong\u003e \u003c\/strong\u003eFestool Roundover Bit HW R2‑OFK 500 Z1\u003cstrong\u003e \u003c\/strong\u003eis designed for clean, controlled edge profiling on small and delicate workpieces. It is optimized for use with the OFKC 500 cordless edge router, delivering smooth, consistent round‑over results on solid wood and plastic edge banding without excess heat buildup.\u003c\/div\u003e\n\u003cdiv\u003eThe single‑flute cutter design reduces friction during routing, helping limit burn marks and maintain surface quality, especially when working across the grain. A collet‑free hollow‑shaft mount threads directly onto the router spindle, minimizing run‑out and improving cut accuracy while eliminating the need for a collet. The flush‑mounted bearing keeps the cutter height low, allowing clean routing in rabbets or across stacked panels where clearance is limited.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle‑flute cutter reduces heat buildup during edge profiling\u003c\/li\u003e\n\u003cli\u003eRound‑over profile produces clean, consistent edge shaping\u003c\/li\u003e\n\u003cli\u003ePrecision‑matched radius aligns accurately with bearing guidance\u003c\/li\u003e\n\u003cli\u003eCollet‑free hollow‑shaft design mounts directly to the router spindle\u003c\/li\u003e\n\u003cli\u003eLow installation height supports routing in rabbets and tight clearances\u003c\/li\u003e\n\u003cli\u003eRelief angle transition helps reduce surface marking at exit points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTool Type: Roundover Bit\u003c\/li\u003e\n\u003cli\u003eProduct Group: Consumable\u003c\/li\u003e\n\u003cli\u003eCutter Design: Single Cutter\u003c\/li\u003e\n\u003cli\u003eMounting Style: Collet‑Free Hollow Shaft\u003c\/li\u003e\n\u003cli\u003eBearing Included: No\u003c\/li\u003e\n\u003cli\u003eCompatible Router: OFKC 500\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Austria\u003c\/li\u003e\n\u003cli\u003eWeight: 0.19 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included:\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eRoundover Bit HW R2‑OFK 500 Z1\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":49873601462510,"sku":"578377","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/578377_000_001.jpg?v=1793052062"},{"product_id":"roundover-bit-hw-r1-ofk-500-z1","title":"Roundover Bit HW R1‑OFK 500 Z1","description":"\u003cdiv\u003e\n\u003cdiv\u003eThe Festool Roundover Bit HW R1‑OFK 500 Z1 is designed for clean, controlled edge profiling on small and delicate workpieces using the OFKC 500 cordless edge router. Its single‑cutter design helps manage heat buildup during routing, producing smooth, consistent round‑over edges with minimal surface marking on both solid wood and plastic edge banding.\u003c\/div\u003e\n\u003cdiv\u003eThis bit mounts directly to the router spindle using Festool’s collet‑free hollow‑shaft system, eliminating collet runout and reducing setup time. The flush‑mounted ball bearing design keeps the installation height low, allowing routing in rabbets or across stacked panels where clearance is limited. A precision‑matched cutter radius and relief angle guide the cut cleanly along the edge for uniform results from start to finish.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle‑flute cutter reduces heat buildup to help limit burn marks\u003c\/li\u003e\n\u003cli\u003eRound‑over profile produces clean, consistent edge shaping\u003c\/li\u003e\n\u003cli\u003ePrecision‑matched cutter radius aligns accurately with bearing guidance\u003c\/li\u003e\n\u003cli\u003eCollet‑free hollow‑shaft design mounts directly to the router spindle\u003c\/li\u003e\n\u003cli\u003eLow installation height supports routing in rabbets and tight clearances\u003c\/li\u003e\n\u003cli\u003eRelief angle transition helps reduce surface marking at exit points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTool Type: Roundover Router Bit\u003c\/li\u003e\n\u003cli\u003eProduct Group: Consumable\u003c\/li\u003e\n\u003cli\u003eCutter Design: Single Cutter\u003c\/li\u003e\n\u003cli\u003eMounting Style: Collet‑Free Hollow Shaft\u003c\/li\u003e\n\u003cli\u003eBearing Included: No\u003c\/li\u003e\n\u003cli\u003eCompatible Router: OFKC 500\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Austria\u003c\/li\u003e\n\u003cli\u003eWeight: 0.187 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included:\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e(1) Festool Roundover Bit HW R1‑OFK 500 Z1\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":49873601659118,"sku":"578376","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/578376_000_001.jpg?v=1793052066"},{"product_id":"basic-cordless-router-mfkc-700","title":"Basic Cordless Router MFKC 700","description":"\u003cdiv\u003e\n\u003cdiv\u003eThe Festool Cordless Modular Edge Router MFKC 700 EB‑Basic delivers precise edge routing with the freedom of a cordless platform and the flexibility of a modular system. Built for controlled trimming, profiling and edge shaping, it combines stable guidance with micro‑adjustable depth control to produce clean, repeatable results across laminate, edge banding, and solid wood.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eA wide, stable base and fine depth adjustment accurate to 1\/256\" (0.1 mm) keep cuts consistent and transitions smooth. The modular design allows quick base changes without tools, so the router adapts easily between trimming, chamfering and detailed edge work. Its slim body and balanced layout support steady handling, while the hard fiber base glides smoothly to protect finished surfaces during routing.\u003c\/div\u003e\n\u003cdiv\u003ePowered by Festool’s brushless EC‑TEC motor, the MFKC 700 maintains consistent speed under load while running quietly and efficiently.\u003c\/div\u003e\n\u003cdiv\u003eVariable-speed control lets you match RPM to the material to reduce burn marks and improve surface quality. Integrated dust extraction captures chips at the cut, helping maintain visibility and a cleaner work area. Bluetooth® battery connectivity automatically starts a paired dust extractor, streamlining workflow without added steps.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTool‑free modular base changes for fast adaptation between routing tasks\u003c\/li\u003e\n\u003cli\u003ePrecise depth adjustment accurate to 1\/256\" (0.1 mm)\u003c\/li\u003e\n\u003cli\u003eWide base over 5\" (130 mm) for stable, controlled routing\u003c\/li\u003e\n\u003cli\u003eBrushless EC‑TEC motor for consistent power with low noise\u003c\/li\u003e\n\u003cli\u003eVariable-speed control to match material and bit size\u003c\/li\u003e\n\u003cli\u003eIntegrated dust extraction channel captures chips at the cut\u003c\/li\u003e\n\u003cli\u003eBluetooth® battery activation for automatic dust extractor start\u003c\/li\u003e\n\u003cli\u003eSlim, lightweight design for steady guidance and reduced fatigue\u003c\/li\u003e\n\u003cli\u003ePush‑button spindle lock for quick router bit changes\u003c\/li\u003e\n\u003cli\u003eHard fiber base resists scratching and protects finished surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTool Type: Cordless Modular Edge Router\u003c\/li\u003e\n\u003cli\u003ePower Source: 18 V Battery\u003c\/li\u003e\n\u003cli\u003eMotor Type: Brushless\u003c\/li\u003e\n\u003cli\u003eCollet Sizes Included: 1\/4\" (6.35 mm), 8 mm\u003c\/li\u003e\n\u003cli\u003eDepth Adjustment Resolution: 1\/256\" (0.1 mm)\u003c\/li\u003e\n\u003cli\u003eBase Diameter: Over 5\" (130 mm)\u003c\/li\u003e\n\u003cli\u003eSpeed Control: Variable\u003c\/li\u003e\n\u003cli\u003eDust Extraction: Integrated Channel\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch3\u003eWhat’s Included:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1\/4\" Collet\u003c\/li\u003e\n\u003cli\u003e8 mm Collet\u003c\/li\u003e\n\u003cli\u003eCollet Wrench\u003c\/li\u003e\n\u003cli\u003eSystainer SYS3 M 187\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":49873604149486,"sku":"578012","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/578012_000_001.jpg?v=1793052110"},{"product_id":"surecut-router-bit-set-5-piece","title":"SureCut Router Bit Set - 5 Piece","description":"\u003cdiv\u003eThe 5-Piece Kreg® SureCut™ Router Bit Set puts the most frequently used router bits in one versatile kit. Designed for use with trim routers and full-size routers, the set covers common routing tasks including edge treatment, flush trimming, grooves and decorative profiles without the need to purchase bits individually.\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv\u003eCarbide-tipped cutting edges stay sharp longer and produce clean cuts in hardwoods, softwoods, plywood and composite materials. The included assortment provides the flexibility to tackle a wide range of projects while maintaining consistent cut quality across different materials.\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv\u003eEach bit features a universal 1\/4\" shank that fits most handheld and router table setups. A durable storage case keeps the bits organized, protected and easy to identify between projects.\u003c\/div\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eCarbide-tipped cutters for long-lasting edge retention\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCovers common routing, trimming and edge-forming applications\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCompatible with trim routers and full-size routers\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eUniversal 1\/4\" shanks fit most routers\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSuitable for hardwoods, softwoods, plywood and composites\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes reusable storage case\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eShank Size: 1\/4\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBit Types Included: Straight bit, flush trim bit, roundover bits, chamfer bit\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCutting Material: Carbide-tipped\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRouter Compatibility: Trim routers\/full-size routers\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eWhat’s Included:\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e(1) Kreg® SureCut™ Router Bit Set (5-Piece)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eContains:\u003c\/p\u003e\n\u003cp\u003e(1) 1\/4\" Straight Bit\u003c\/p\u003e\n\u003cp\u003e(1) 1\/2\" Flush Trim Bit\u003c\/p\u003e\n\u003cp\u003e(1) 1\/8\" Roundover Bit\u003c\/p\u003e\n\u003cp\u003e(1) 3\/8\" Roundover Bit\u003c\/p\u003e\n\u003cp\u003e(1) 1\/2\" 45° Chamfer Bit\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e(1) Storage Case\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":49873605099758,"sku":"199928","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/199928_000_001.jpg?v=1793052127"},{"product_id":"chamfer-guide-base","title":"Chamfer Guide Base","description":"\u003cp\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cdiv\u003eThe Festool Chamfer Adaptor FNS-HLC 82 adds controlled chamfering capability to the HLC 82 cordless planer, allowing you to break edges consistently without switching tools. It mounts directly to the planer and provides a stable reference surface that keeps chamfers even and predictable across long edges and repeated passes.\u003c\/div\u003e\n\u003cdiv\u003eBy widening the contact area at the front of the planer, the adaptor improves stability at the start and end of each cut. This reduces the tendency to tip or dig in, especially on narrow stock or door edges, and helps maintain a uniform chamfer depth from end to end. The result is cleaner transitions and less corrective sanding after planing.\u003c\/div\u003e\n\u003cdiv\u003eDesigned specifically for the Festool HLC 82, the adaptor installs quickly using the planer’s integrated mounting points. Once attached, it stays rigidly aligned during operation, making it well suited for trimming doors, chamfering beams, and finishing visible edges where consistency matters.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExpands the planer’s front support area for steadier chamfering\u003c\/li\u003e\n\u003cli\u003eHelps maintain consistent chamfer depth along long or narrow edges\u003c\/li\u003e\n\u003cli\u003eReduces tipping at the start and end of a pass\u003c\/li\u003e\n\u003cli\u003eDirect-fit design made specifically for the HLC 82 cordless planer\u003c\/li\u003e\n\u003cli\u003eInstalls quickly using integrated mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Number: 577989\u003c\/li\u003e\n\u003cli\u003eProduct Type: Chamfer Adaptor\u003c\/li\u003e\n\u003cli\u003eCompatibility: Festool HLC 82 Cordless Planer\u003c\/li\u003e\n\u003cli\u003eMounting Method: Direct attachment to planer body\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: CZ\u003c\/li\u003e\n\u003cli\u003eQuantity In Pack: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included:\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eChamfer Adaptor FNS-HLC 82\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":49873605230830,"sku":"577989","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/577989_000_001.jpg?v=1793052129"},{"product_id":"cordless-edge-router-ofkc-500-basic","title":"Cordless Edge Router - OFKC 500 Basic","description":"\u003cdiv\u003e\n\u003cdiv\u003eThe Festool Cordless Edge Router OFKC 500 R3 EB‑Basic delivers controlled edge routing with the freedom of a cordless platform. The compact form and centered weight distribution keep the router steady in hand, helping maintain consistent results along exposed edges.\u003c\/div\u003e\n\u003cdiv\u003eA highly accurate depth adjustment system allows changes down to 1\/256\" (1\/10 mm), making it easier to dial in clean cuts without test passes or rework. The rigid connection between cutter and spindle improves run‑out accuracy, keeping the bit tracking true through the cut. Matched cutters and base geometry reduce alignment errors when routing flush, chamfered or rounded edges.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe brushless EC‑TEC motor delivers smooth power with low noise and vibration while monitoring temperature to protect the motor over time. Variable speed control helps manage heat buildup on sensitive materials. A push‑button spindle lock simplifies bit changes, keeping downtime to a minimum.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eA transparent dust extraction attachment improves visibility while capturing chips at the cut. When used with a compatible Bluetooth® dust extractor, the battery automatically triggers dust collection for a cleaner workspace. The hard fiber base glides smoothly across surfaces to reduce marking on finished work.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCordless design allows unrestricted edge routing\u003c\/li\u003e\n\u003cli\u003eWell‑balanced body improves stability during cuts\u003c\/li\u003e\n\u003cli\u003eDepth adjustment accurate to 1\/256\" (1\/10 mm)\u003c\/li\u003e\n\u003cli\u003eSolid cutter‑to‑spindle connection improves run‑out accuracy\u003c\/li\u003e\n\u003cli\u003ePush‑button spindle lock supports fast bit changes\u003c\/li\u003e\n\u003cli\u003eVariable speed adapts cutting speed to material\u003c\/li\u003e\n\u003cli\u003eBrushless EC‑TEC motor reduces noise and vibration\u003c\/li\u003e\n\u003cli\u003eTransparent dust extraction attachment improves chip control\u003c\/li\u003e\n\u003cli\u003eBluetooth® battery activates dust extraction automatically\u003c\/li\u003e\n\u003cli\u003eHard fiber base glides smoothly to help protect surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Part Number: 577986\u003c\/li\u003e\n\u003cli\u003eEAN: 4014549445235\u003c\/li\u003e\n\u003cli\u003eTool Type: Cordless edge router\u003c\/li\u003e\n\u003cli\u003eMotor Type: Brushless\u003c\/li\u003e\n\u003cli\u003eDepth Adjustment Accuracy: 1\/256\" \/ 0.1 mm\u003c\/li\u003e\n\u003cli\u003eSpeed Control: Variable RPM\u003c\/li\u003e\n\u003cli\u003eDust Collection: Compatible with Festool Bluetooth® extractors\u003c\/li\u003e\n\u003cli\u003eOverall Dimensions: 15.59\" L x 11.65\" W x 7.36\" H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\u003cli\u003e(1) Cordless edge router (tool only, batteries and charger not included)\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":49873605558510,"sku":"577986","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/577986_000_001.jpg?v=1793052134"},{"product_id":"edge-trimming-cutter-d22-8-ofk","title":"Edge Trimming Cutter D22\/8 OFK","description":"\u003cdiv\u003e\n\u003cdiv\u003eThe Festool Edge Trimming Cutter HW\/KLS D22\/8‑OFK is built for fast, accurate flush trimming of edge banding on both solid wood and plastic materials. It delivers clean edges with minimal setup time and consistent control at the router.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe collet‑free hollow‑shaft design mounts directly to the trim router shaft, eliminating the need for a collet and reducing setup steps. This direct mounting improves stability at the cutter, helping maintain a smooth cut without vibration. Precisely matched cutter diameter and bearing geometry keep the cutter tracking true along the workpiece edge, producing a clean, even trim without digging or wavering.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eDurable carbide blades hold their edge through repeated use, supporting consistent results across multiple parts. The integrated cutter and bearing relationship allows the router to move predictably along the edge banding, improving control and reducing rework during finishing.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlush trims edge banding on solid wood and plastic materials\u003c\/li\u003e\n\u003cli\u003eCollet‑free hollow‑shaft design mounts directly to trim router shaft\u003c\/li\u003e\n\u003cli\u003eCarbide cutting edges support long service life\u003c\/li\u003e\n\u003cli\u003eMatched cutter diameter and bearing guide the cut evenly\u003c\/li\u003e\n\u003cli\u003eDesigned for controlled, stable trimming performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer Part Number: 490565\u003c\/li\u003e\n\u003cli\u003eEAN: 4014549058459\u003c\/li\u003e\n\u003cli\u003eCutter Type: Edge Trimming Cutter\u003c\/li\u003e\n\u003cli\u003eMaterial Composition: Carbide\/Steel\u003c\/li\u003e\n\u003cli\u003eMounting Style: Hollow Shaft, Collet‑Free\u003c\/li\u003e\n\u003cli\u003eOverall Dimensions: 4.06\" L x 2.05\" W x 2.05\" H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\u003cli\u003e(1) Festool Edge Trimming Cutter D22\/8 OFK\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":49873606869230,"sku":"490565","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/490565_000_001.jpg?v=1793052143"},{"product_id":"bearing-guide-d22-ofk","title":"Bearing Guide D22 OFK","description":"\u003cdiv\u003e\n\u003cdiv\u003eThe Festool Bearing Guide KLS‑D22‑OFK is a replacement bearing designed to restore clean, controlled flush trimming when working with the HW D 22\/8‑OFK edge trimming router bit. It provides a stable reference surface that keeps the cutter aligned tight to the workpiece edge, reducing wander and uneven passes during routing.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eMachined from steel for consistent rotation, the bearing delivers smooth contact as it rides along the workpiece. The integrated mounting screw slides directly into the router bit mounted on the trim router, allowing fast replacement without modifying the bit. Once installed, the bearing maintains a consistent offset, so edges track cleanly and trimming stays accurate across repeated cuts.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThis bearing guide is suited for woodworkers who rely on precise edge control from their router accessories and want to maintain factory‑level performance from compatible Festool router bits.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement bearing for HW D 22\/8‑OFK edge trimming router bit\u003c\/li\u003e\n\u003cli\u003eProvides a consistent flush reference along the workpiece edge\u003c\/li\u003e\n\u003cli\u003ePrecision‑machined steel bearing for smooth rotation\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting screw slides directly into the router bit\u003c\/li\u003e\n\u003cli\u003eMaintains accurate tracking during flush trimming\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel Number: 490250\u003c\/li\u003e\n\u003cli\u003eEAN: 4014549116050\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eLength: 2.17\"\u003c\/li\u003e\n\u003cli\u003eWidth: 1.93\"\u003c\/li\u003e\n\u003cli\u003eHeight: 0.98\"\u003c\/li\u003e\n\u003cli\u003eCompatibility: HW D 22\/8‑OFK edge trimming router bit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\u003cli\u003e(1) Festool Bearing Guide D22 OFK\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":49873607262446,"sku":"490250","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/490250_000_001.jpg?v=1793052150"},{"product_id":"bearing-guide-d-15-8-ofkc","title":"Bearing Guide D 15.8 OFKC","description":"\u003cdiv\u003e\u003cdiv\u003e\n\u003cdiv\u003eFestool Bearing Guide KLS-D 15,8-OFK delivers smooth, accurate flush trimming by providing a consistent reference point for clean, controlled routing along workpiece edges. Designed as a direct replacement bearing, it installs easily and keeps your trim work precise.\u003c\/div\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision-machined steel for smooth, reliable performance\u003c\/li\u003e\n\u003cli\u003eIntegrated screw installs directly into the router bit\u003c\/li\u003e\n\u003cli\u003eProvides consistent flush-trim guidance\u003c\/li\u003e\n\u003cli\u003eHelps produce clean, accurate edge-following cuts\u003c\/li\u003e\n\u003cli\u003eIdeal replacement bearing for trim routing tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: 490249\u003c\/li\u003e\n\u003cli\u003eEAN: 4014549115954\u003c\/li\u003e\n\u003cli\u003eMaterial: Precision-machined steel\u003c\/li\u003e\n\u003cli\u003eLength: 2.09\"\u003c\/li\u003e\n\u003cli\u003eWidth: 1.81\"\u003c\/li\u003e\n\u003cli\u003eHeight: 0.71\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e(1) Festool Bearing Guide D 15.8 OFKC\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":49873608737006,"sku":"490249","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/490249_000_001.jpg?v=1793052166"},{"product_id":"roundover-2-cutter-1-4-6-mm","title":"Roundover 2 Cutter - 1\/4\" (6 mm)","description":"\u003cp\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cdiv\u003eThe Festool ¼\" Roundover Bit HW R6‑OFK 500 is built for controlled, accurate edge rounding on solid wood and plastic edge banding. Designed for use with Festool trim routers, this bit delivers a smooth, consistent round‑over on small parts and detailed work where precision matters and margins are tight.\u003c\/div\u003e\n\u003cdiv\u003eA hollow, direct‑thread design mounts straight to the router shaft without a collet, reducing run‑out and improving stability at the cut. That direct connection helps maintain uniform contact through the entire pass, producing clean profiles with less vibration and better surface quality. Dual carbide cutting edges extend cutting life while maintaining consistent results across repeat passes.\u003c\/div\u003e\n\u003cdiv\u003eIts low‑profile geometry allows access in tight areas such as rabbets or stacked panels, making it easier to maintain control when space is limited. A precision‑ground radius blends into a 5° relief angle, easing the exit cut to reduce surface marking and cleanup time. The result is a refined edge that holds its shape and finish.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eDual carbide cutting edges for longer life and consistent cutting\u003c\/li\u003e\n\u003cli\u003ePrecision‑ground round‑over radius for uniform edge profiles\u003c\/li\u003e\n\u003cli\u003eDirect‑thread, hollow design mounts without a collet for improved stability\u003c\/li\u003e\n\u003cli\u003eLow‑profile body fits into rabbets and across stacked panels\u003c\/li\u003e\n\u003cli\u003e5° relief transition for smoother exits and reduced surface marking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eBit Type: Roundover\u003c\/li\u003e\n\u003cli\u003eRadius: R6\u003c\/li\u003e\n\u003cli\u003eCutting Edges: 2\u003c\/li\u003e\n\u003cli\u003eMounting Style: Direct thread\u003c\/li\u003e\n\u003cli\u003eOverall Dimensions: 4.09\" L x 2.13\" W x 2.09\" H\u003c\/li\u003e\n\u003cli\u003eModel Number: 490096\u003c\/li\u003e\n\u003cli\u003eEAN: 4014549114650\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\u003cli\u003e(1) Festool Roundover Bit HW R6‑OFK 500, Model 490096\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":49873609031918,"sku":"490096","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/490096_000_001.jpg?v=1793052171"},{"product_id":"roundover-2-cutter-3-16-5-mm","title":"Roundover 2 Cutter - 3\/16\" (5 mm)","description":"\u003cp\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cdiv\u003eThe Festool 3\/16\" Roundover Bit HW R5‑OFK 500 is built for controlled edge profiling on solid wood and plastic edge banding using the Festool OFK 500 trim router. It produces a smooth R5 round‑over that softens edges evenly while maintaining a consistent profile across small parts and detailed workpieces.\u003c\/div\u003e\n\u003cdiv\u003eA hollow, direct‑thread design mounts directly onto the router shaft with no collet required. This reduces run‑out and vibration at the cutter, helping maintain a steady cutting radius and predictable depth throughout the pass. The low‑profile body allows routing in rabbets or across stacked panels where clearance is limited.\u003c\/div\u003e\n\u003cdiv\u003eTwo precision‑ground carbide cutting edges provide long service life while maintaining a clean, even cut. The cutting radius transitions into a 5° relief angle, improving exit quality and reducing surface marking along finished edges.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual carbide cutting edges for consistent cutting performance and extended life\u003c\/li\u003e\n\u003cli\u003ePrecision‑ground R5 radius produces smooth, uniform round‑overs\u003c\/li\u003e\n\u003cli\u003eDirect‑thread mounting improves run‑out accuracy and cutting stability\u003c\/li\u003e\n\u003cli\u003eLow-profile design allows routing in rabbets and across stacked panels\u003c\/li\u003e\n\u003cli\u003e5° relief angle reduces exit marks and surface scuffing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel Number: 490095\u003c\/li\u003e\n\u003cli\u003eEAN: 4014549114551\u003c\/li\u003e\n\u003cli\u003eProfile Radius: R5\u003c\/li\u003e\n\u003cli\u003eCutting Edges: 2\u003c\/li\u003e\n\u003cli\u003eMaterial: Carbide\u003c\/li\u003e\n\u003cli\u003eOverall Dimensions: 4.06\" L x 2.05\" W x 2.05\" H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included:\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e(1) Festool Roundover Bit HW R5‑OFK 500, Model 490095\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":49873612079342,"sku":"490095","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/490095_000_001.jpg?v=1793052184"},{"product_id":"roundover-2-cutter-15-32-4-mm","title":"Roundover 2 Cutter - 15\/32\" (4 mm)","description":"\u003cp\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cdiv\u003eThe Festool 15\/32\" Roundover Bit HW R4‑OFK 500 is designed for clean, controlled edge profiling on solid wood and plastic edge banding using the OFK 500 trim router. It produces a smooth R4 round‑over that softens edges evenly while maintaining a consistent profile across small parts and detailed workpieces.\u003c\/div\u003e\n\u003cdiv\u003eA hollow, direct‑thread design mounts directly onto the router shaft with no collet required. This reduces run‑out and vibration at the cutter, helping maintain a steady cutting radius and predictable depth throughout the pass. The low‑profile body allows access in rabbets or across stacked panels where clearance is limited.\u003c\/div\u003e\n\u003cdiv\u003eDual carbide cutting edges deliver consistent cutting performance over repeated use. The precision‑ground radius transitions into a 5° relief angle, improving exit quality and reducing surface marking along finished edges.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual carbide cutting edges support consistent cutting performance and longer service life\u003c\/li\u003e\n\u003cli\u003ePrecision‑ground R4 radius produces smooth, uniform round‑overs\u003c\/li\u003e\n\u003cli\u003eDirect‑thread mounting improves run‑out accuracy and cutting stability\u003c\/li\u003e\n\u003cli\u003eLow profile design allows routing in rabbets and across stacked panels\u003c\/li\u003e\n\u003cli\u003e5° relief angle reduces exit marks and surface scuffing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel Number: 490094\u003c\/li\u003e\n\u003cli\u003eEAN: 4014549114452\u003c\/li\u003e\n\u003cli\u003eProfile Radius: R4\u003c\/li\u003e\n\u003cli\u003eCutting Edges: 2\u003c\/li\u003e\n\u003cli\u003eMaterial: Carbide\u003c\/li\u003e\n\u003cli\u003eOverall Dimensions: 4.09\" L x 2.08\" W x 2.06\" H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included:\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e(1) Festool Roundover Bit HW R4‑OFK 500, Model 490094\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":49873612767470,"sku":"490094","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/490094_000_001.jpg?v=1793052192"},{"product_id":"roundover-2-cutter-1-8-3-mm","title":"Roundover 2 Cutter - 1\/8\" (3 mm)","description":"\u003cp\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cdiv\u003eThe 1\/8\" Festool Roundover Bit HW R3‑OFK 500 is designed for controlled edge profiling on solid wood and plastic edge banding using the Festool OFK 500 trim router. It cuts a smooth R3 round‑over that softens edges cleanly and leaves a consistent finished profile on small parts and detailed workpieces.\u003c\/div\u003e\n\u003cdiv\u003eA hollow, direct‑thread design mounts directly onto the router shaft with no collet required. This improves run‑out accuracy and reduces vibration at the cutter, helping maintain a uniform radius and predictable depth throughout the cut. The low‑profile body allows routing inside rabbets or across stacked panels where clearance is limited.\u003c\/div\u003e\n\u003cdiv\u003eTwo precision‑ground carbide cutting edges extend cutter life while maintaining a steady, even cut. The cutting radius transitions into a 5° relief angle, improving exit quality and reducing surface marking on finished edges.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual carbide cutting edges for consistent cutting and extended service life\u003c\/li\u003e\n\u003cli\u003ePrecision‑ground R3 radius produces smooth, uniform round‑overs\u003c\/li\u003e\n\u003cli\u003eDirect‑thread mounting improves run‑out accuracy and cutting stability\u003c\/li\u003e\n\u003cli\u003eLow-profile design supports routing in rabbets and stacked panels\u003c\/li\u003e\n\u003cli\u003e5° relief angle reduces exit marks and surface scuffing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel Number: 490093\u003c\/li\u003e\n\u003cli\u003eEAN: 4014549114353\u003c\/li\u003e\n\u003cli\u003eProfile Radius: R3\u003c\/li\u003e\n\u003cli\u003eCutting Edges: 2\u003c\/li\u003e\n\u003cli\u003eMaterial: Carbide\u003c\/li\u003e\n\u003cli\u003eOverall Dimensions: 4.06\" L x 2.05\" W x 2.05\" H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included:\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e(1) Festool Roundover Bit HW R3‑OFK 500, Model 490093\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":49873613127918,"sku":"490093","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/490093_000_001.jpg?v=1793052199"},{"product_id":"roundover-2-cutter-3-32-2-mm","title":"Roundover 2 Cutter - 3\/32\" (2 mm)","description":"\u003cdiv\u003e\n\u003cdiv\u003eThe Festool 3\/32\" Roundover Bit HW R2‑OFK 500 is built for controlled, accurate edge profiling on solid wood and plastic edge banding using the OFK 500 trim router. It cuts a smooth, consistent round‑over that cleans up sharp edges and leaves a uniform finished profile on small parts and detailed work.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eA hollow, direct‑thread design mounts straight onto the router shaft without a collet, improving run‑out accuracy and reducing vibration at the cutter. This keeps the cutting radius consistent from start to finish and allows clean results even on narrow edges or stacked material.\u003c\/div\u003e\n\u003cdiv\u003eTwo carbide cutting edges extend service life while maintaining a steady cut. The precision‑ground radius transitions into a 5° relief angle, helping the bit exit the cut smoothly and reduce surface marking. A low‑profile design allows routing inside rabbets or across layered panels without sacrificing control.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual carbide cutting edges for extended life and consistent cutting\u003c\/li\u003e\n\u003cli\u003ePrecision‑ground R2 round‑over radius for uniform edge profiles\u003c\/li\u003e\n\u003cli\u003eDirect‑thread mounting eliminates the collet for improved run‑out accuracy\u003c\/li\u003e\n\u003cli\u003eLow profile design supports routing in rabbets and stacked panels\u003c\/li\u003e\n\u003cli\u003e5° relief angle helps reduce exit marks on finished surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel Number: 490092\u003c\/li\u003e\n\u003cli\u003eEAN: 4014549114254\u003c\/li\u003e\n\u003cli\u003eProfile Radius: R2\u003c\/li\u003e\n\u003cli\u003eCutting Edges: 2\u003c\/li\u003e\n\u003cli\u003eMaterial: Carbide\u003c\/li\u003e\n\u003cli\u003eOverall Dimensions: 4.06\" L x 2.05\" W x 2.05\" H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch3\u003eWhat’s Included:\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e(1) Festool Roundover Bit HW R2‑OFK 500, Model 490092\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":49873613455598,"sku":"490092","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/490092_000_001.jpg?v=1793052207"},{"product_id":"precision-router-table-insert-plate-predrilled-for-kreg-routers","title":"Precision Router Table Insert Plate - Predrilled for Kreg Routers","description":"\u003cdiv\u003eThe Kreg® Precision Router Table Insert Plate - Predrilled for Kreg provides a flat, stable mounting surface that helps routers perform accurately in a router table setup. Made from 3\/8\" thick phenolic material, the plate resists sagging under the weight of large routers, helping maintain consistent bit height and smooth stock feeding.\u003c\/div\u003e\u003cbr\u003e\u003cdiv\u003ePredrilled mounting holes and included hardware simplify installation for compatible Kreg routers, while alignment marks make positioning and centering straightforward. The plate accepts Kreg Level-Loc reducing rings, allowing the opening around the bit to be sized appropriately for improved workpiece support and safer operation.\u003c\/div\u003e\u003cbr\u003e\u003cdiv\u003eAt 9-1\/4\" x 11-3\/4\", the insert plate fits many router table applications and is designed to provide a flush, level mounting surface that supports accurate routing results.\u003c\/div\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003e3\/8\" thick phenolic construction resists sagging\u003c\/li\u003e\n\u003cli\u003ePredrilled for compatible Kreg routers\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware\u003c\/li\u003e\n\u003cli\u003eAlignment marks simplify router positioning\u003c\/li\u003e\n\u003cli\u003eSupports flush, level router table installation\u003c\/li\u003e\n\u003cli\u003eAccommodates small and large routers\u003c\/li\u003e\n\u003cli\u003e1\", 1-3\/16\", 2-5\/8\" Level-Loc Reducing Rings included\u003c\/li\u003e\n\u003cli\u003e1-3\/16\" Level-Loc Reducing Ring compatible with universal-style guide bushings\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003eMaterial: Phenolic\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/8\" (9.5 mm)\u003c\/li\u003e\n\u003cli\u003eDimensions: 9-1\/4\" x 11-3\/4\" (235 mm x 298 mm)\u003c\/li\u003e\n\u003cli\u003ePredrilled For: Kreg routers\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003cb\u003eWhat’s Included:\u003c\/b\u003e\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003e(1) Kreg Precision Router Table Insert Plate - Predrilled for Kreg\u003c\/li\u003e\n\u003cli\u003e(3) Level-Loc Reducing Rings: 1\", 1-3\/16\", 2-5\/8\"\u003c\/li\u003e\n\u003cli\u003eInstallation Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e","brand":"Kreg","offers":[{"title":"Default Title","offer_id":49873613783278,"sku":"199915","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/199915_000_001.jpg?v=1793052212"},{"product_id":"chamfer-cutter-45-degree-ofkc","title":"Chamfer Cutter - 45 Degree - OFKC","description":"\u003cdiv\u003e\n\u003cdiv\u003eThe Festool Chamfer Cutter delivers clean, consistent bevels with a trim router. Designed to cut a precise 45° chamfer, it produces smooth, uniform results on solid wood and plastic edge banding where accuracy at the edge matters.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThis cutter mounts directly onto the Festool OFK 500 trim router shaft using a hollow, direct‑thread design. Eliminating the collet reduces runout and vibration, helping maintain stable cutting depth and a steady profile from start to finish. Setup is fast and secure, keeping adjustments simple while maintaining full control during edge work.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eA durable carbide cutting edge delivers long service life while maintaining a clean cut across repeated passes. The result is a crisp chamfer that requires minimal cleanup and holds its shape across multiple workpieces.\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCuts a precise 45° chamfer for clean beveled edges\u003c\/li\u003e\n\u003cli\u003eDirect‑thread mounting installs straight onto the router shaft\u003c\/li\u003e\n\u003cli\u003eHollow design improves stability and reduces vibration\u003c\/li\u003e\n\u003cli\u003eCarbide cutting edge maintains consistent results over time\u003c\/li\u003e\n\u003cli\u003eSuitable for solid wood and plastic edge banding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel Number: 490090\u003c\/li\u003e\n\u003cli\u003eEAN: 4014549114056\u003c\/li\u003e\n\u003cli\u003eCutter Angle: 45°\u003c\/li\u003e\n\u003cli\u003eMaterial: Carbide\u003c\/li\u003e\n\u003cli\u003eOverall Dimensions: 3.98\" L x 2.17\" W x 2.09\" H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ch3\u003eWhat’s Included:\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e(1) Festool Chamfer Cutter HW 45°‑OFK 500, Model 490090\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":49873613979886,"sku":"490090","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0829\/6982\/1422\/files\/490090_000_001.jpg?v=1793052215"}],"url":"https:\/\/mygoodsdepot.shop\/collections\/routers-bits-accessories.oembed","provider":"Ardenova","version":"1.0","type":"link"}